low-cost, industrial, quartz shear icp® accel., 100 mv/g, 0.3 to 10k hz, top exit, 2-pin conn., single point iso 17025 accredited calibration

Platinum Low-cost Quartz Accelerometer

Model 627A01

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
8	Lead Time for 1-20 is 14 Dys. Lead Time for 21-80 is 3 Wks.

Low-cost, industrial, quartz shear ICP® accel., 100 mV/g, 0.3 to 10k Hz, top exit, 2-pin conn., single point ISO 17025 accredited calibration

This industrial accelerometer features a quartz sensing element. Quartz has superior thermal stability compared to typical ceramic elements.

Sensitivity: (±15%)100 mV/g (10.2 mV/(m/s²))
Frequency Range: (±3dB)20 to 600000 cpm (0.33 to 10000 Hz)
Sensing Element: Quartz
Measurement Range: ±50 g (±490 m/s²)
Weight: 3.3 oz (94 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	100 mV/g	10.2 mV/(m/s²)	[1]
Measurement Range	±50 g	±490 m/s²
Frequency Range (±3 dB)	20 to 600000 cpm	0.33 to 10000 Hz	[3]
Resonant Frequency	1080 kcpm	18 kHz	[4]
Broadband Resolution (1)	1000 µg	9810 µm/sec²	[4]
Non-Linearity	±1 %	±1 %	[2]
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	5000 g pk	49050 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[4]
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 1% of bias)	≤10 sec	≤10 sec
Discharge Time Constant	≥0.5 sec	≥0.5 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<100 Ohm	<100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Spectral Noise (10 Hz)	50 µg/√Hz	491 (µm/sec²)/√Hz	[4]
Spectral Noise (100 Hz)	20 µg/√Hz	196 (µm/sec²)/√Hz	[4]
Spectral Noise (1 kHz)	6 µg/√Hz	59 (µm/sec²)/√Hz	[4]
Electrical Protection	RFI/ESD	RFI/ESD
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Hex	7/8 in	22 mm
Size - Height	2.06 in	52.3 mm
Weight	3.3 oz	94 gm
Mounting Thread	1/4-28 Female	1/4-28 Female	[5]
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Quartz	Quartz
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	2-Pin MIL-C-5015	2-Pin MIL-C-5015
Electrical Connection Position	Top	Top