platinum stock products; ring-style, industrial, ceramic shear icp® accel, 100 mv/g, 0.2 to 10.5k hz, side exit, 2-pin conn., frequency sweep iso 17025 accredited calibration

Platinum Precision Industrial ICP® Accelerometer

Model 625B01

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Call for Lead Time

Platinum Stock Products; Ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10.5k Hz, side exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration

Sensitivity: (±5%) 100 mV/g (10.2 mV/(m/s²))
Frequency Range: (±3dB)12 to 630000 cpm (0.2 to 10500 Hz)
Sensing Element: Ceramic
Measurement Range: ±50 g (±490 m/s²)
Weight: 5.1 oz (145 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±5 %)	100 mV/g	10.2 mV/(m/s²)	[1]
Measurement Range	±50 g	±490 m/s²
Frequency Range (±5 %)	30 to 390000 cpm	0.5 to 6500 Hz	[3]
Frequency Range (±10 %)	22 to 450000 cpm	0.37 to 7500 Hz
Frequency Range (±3 dB)	12 to 630000 cpm	0.2 to 10500 Hz
Resonant Frequency	1500 kcpm	25 kHz	[4]
Broadband Resolution (1)	50 µg	491 µm/sec²	[4]
Non-Linearity	±1 %	±1 %	[2]
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	5000 g pk	49050 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[4]
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 1% of bias)	≤8.0 sec	≤8.0 sec
Discharge Time Constant	≥1.0 sec	≥1.0 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<100 Ohm	<100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Spectral Noise (10 Hz)	2.5 µg/√Hz	24.5 (µm/sec²)/√Hz	[4]
Spectral Noise (100 Hz)	0.8 µg/√Hz	7.8 (µm/sec²)/√Hz	[4]
Spectral Noise (1 kHz)	0.5 µg/√Hz	4.9 (µm/sec²)/√Hz	[4]
Electrical Protection	RFI/ESD	RFI/ESD
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Diameter	1.36 in	35.1 mm
Size - Height	1.13 in	28.7 mm
Weight	5.1 oz	145 gm
Mounting	Through Hole	Through Hole
Mounting Thread	1/4-28 Male	Not Applicable	[5]
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	2-Pin MIL-C-5015	2-Pin MIL-C-5015
Electrical Connection Position	Side	Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ICS-1	Calibration of industrial accel. with full frequency response plot and NIST-traceable certificate	1
080B45	Protective thermal boot for use with series 625 sensors	1
081A73	1/4-28 x 1.34" hex head captive thru bolt	1

Optional Versions

(CS) Canadian Standards Association Approved Intrinsically Safe

	English	SI
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I

(LB) Low Bias Voltage

	English	SI
Output Bias Voltage	6 to 8 VDC
Excitation Voltage	12 to 28 VDC
Measurement Range	±35 g	±343 m/s²

(M) Metric Mount

Accessories:
Supplied	M081A73	Captive Mounting Bolt	1

(TO) Temperature Output

	English	SI
Temperature Output Range	+36 to +250 °F	+2 to +121 °C
Temperature Scale Factor	5.56 mV/°F + 32	+10 mV/°C
Electrical Connector	3-Pin
Electrical Connections	Acceleration Output
Electrical Connections	Ground
Electrical Connections	Temperature Output