Products

Low-cost Industrial ICP® Accelerometer

Model 601A02

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
13	Lead Time for 1-10 is 14 Dys. Lead Time for 11-25 is 3 Wks.

Platinum Stock Products: Low-noise, industrial, ceramic shear ICP® accel, 500 mV/g 0.17 to 10k Hz, top exit, 2-pin conn. single point ISO 17025 accredited calibration

Sensitivity: (±20%)500 mV/g (51 mV/(m/s²))
Frequency Range: (±3dB)10 to 180000 cpm (0.17 to 8000 Hz)
Sensing Element: Ceramic
Measurement Range: ±10 g (±98 m/s²)
Weight: 2.8 oz (80 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±20 %)	500 mV/g	51 mV/(m/s²)	[1]
Measurement Range	±10 g	±98 m/s²
Frequency Range (±5 %)	28 to 240000 cpm	0.47 to 4000 Hz	[3]
Frequency Range (±10 %)	20 to 300000 cpm	0.33 to 5000 Hz
Frequency Range (±3 dB)	10 to 180000 cpm	0.17 to 8000 Hz
Resonant Frequency	960 kcpm	16 kHz	[4]
Broadband Resolution (1)	35 µg	343 µm/sec²	[4]
Non-Linearity	±1 %	±1 %	[2]
Transverse Sensitivity	≤7 %	≤7 %
Environmental
Overload Limit (Shock)	5000 g pk	49050 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[4]
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 1% of bias)	≤10 sec	≤10 sec
Discharge Time Constant	≥1.0 sec	≥1.0 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<150 Ohm	<150 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Spectral Noise (10 Hz)	3 µg/√Hz	29.4 (µm/sec²)/√Hz	[4]
Spectral Noise (100 Hz)	0.7 µg/√Hz	6.9 (µm/sec²)/√Hz	[4]
Spectral Noise (1 kHz)	0.5 µg/√Hz	4.9 (µm/sec²)/√Hz	[4]
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Hex	7/8 in	22.2 mm
Size - Height	1.94 in	49.3 mm
Weight	2.8 oz	80 gm
Mounting Thread	1/4-28 Female	N/A	[5]
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Electrical Connector	2-Pin MIL-C-5015	2-Pin MIL-C-5015
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connection Position	Top	Top

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A40	Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip	1
ICS-2	Calibration of industrial accel., single-point, 100 Hz reference sensitivity	1