Performance |
Channels |
4 |
4 |
|
Sensor Input Type(s) |
ICP®, Voltage, Charge |
ICP®, Voltage, Charge |
|
Voltage Gain |
x0 to x200 |
x0 to x200 |
|
Voltage Gain Increment |
0.1 |
0.1 |
|
Accuracy (Gain, x0.1 to x0.4) |
±5 % |
±5 % |
|
Accuracy (Gain, x0.5 to x200) |
±1 % |
±1 % |
|
Sensitivity (±1 %) (Charge Input @ 100 Hz) |
0.1 / 1.0 / 10.0 mV/pC |
0.1 / 1.0 / 10.0 mV/pC |
|
Insulation Resistance at Input(Minimum Required) (0.1) |
10 kohm |
10 kohm |
|
Insulation Resistance at Input (1.0) |
100 kohm |
100 kohm |
|
Insulation Resistance at Input (10.0) |
1 MOhm |
1 MOhm |
|
Input Range (Charge Input, Nominal) |
±100000 pC |
±100000 pC |
|
Output Range (Minimum) |
±10 Vpk |
±10 Vpk |
|
Frequency Range (-5 %) (x100 to x200 Gain) |
0.05 to 75000 Hz |
0.05 to 75000 Hz |
|
Frequency Range (-5 %) (x0.1 to x99.9 Gain) |
0.05 to 100000 Hz |
0.05 to 100000 Hz |
|
Low Frequency Response (-5 %) (Charge Input) |
0.5 Hz |
0.5 Hz |
[1]
|
Electrical Filter Roll-off |
80 dB/decade |
80 dB/decade |
|
Filter Type (Fourth-order Butterworth) |
Low Pass |
Low Pass |
|
Electrical Filter Corner Frequency (-3 dB) |
10 kHz |
10 kHz |
[2]
[3]
|
Electrical Filter Roll-off |
24 dB/octave |
24 dB/octave |
|
Electrical Filter Pass Band Amplitude Accuracy |
1 % |
1 % |
|
Electrical Filter Stop Band Attenuation (Minimum) |
96 dB |
96 dB |
|
Phase Response (at 1 kHz) |
±1 ° |
±1 ° |
|
Non-Linearity (Charge Input) |
≤1 % FS |
≤1 % FS |
|
Cross Talk (maximum) |
-72 dB |
-72 dB |
|
TEDS Sensor Support |
Yes |
Yes |
|
Fault/Bias Monitor/Meter (LED) |
Open/Short/Overload |
Open/Short/Overload |
|
Control Interface |
Digital Control Interface |
RS-232 |
RS-232 |
|
Human Interface |
Keypad |
Keypad |
|
Display |
2 rows, 16 columns |
2 rows, 16 columns |
|
Digital Control: Data Rate |
19200 bps |
19200 bps |
|
Digital Control: Start, Data, Stop, Parity |
1, 8, 1, No |
1, 8, 1, No |
|
Digital Control: Handshaking |
RTS/CTS |
RTS/CTS |
|
Digital Control: Cable Length (Maximum) |
50 ft |
15.2 m |
|
Environmental |
Temperature Range (Operating) |
+32 to +120 °F |
0 to +50 °C |
|
Electrical |
Power Required (for supplied AC power adaptor) |
AC Power |
AC Power |
|
Power Required (direct input to unit) |
DC Power |
DC Power |
|
AC Power (50 to 60 Hz) |
100 to 240 VAC |
100 to 240 VAC |
|
AC Power |
≤1.6 Amps |
≤1.6 Amps |
|
DC Power |
+9 to +18 VDC |
+9 to +18 VDC |
|
DC Power |
≤2.5 Amps |
≤2.5 Amps |
|
Excitation Voltage (To Sensor) |
≥+24 VDC |
≥+24 VDC |
|
DC Offset |
≤50 mV |
≤50 mV |
|
Constant Current Excitation (To Sensor) |
0 to 20 mA |
0 to 20 mA |
[5]
|
Output Impedance |
≤50 Ohm |
≤50 Ohm |
|
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) |
50 µV rms |
50 µV rms |
[4]
|
Spectral Noise (1 Hz ) (Gain x1) |
8.0 µV/√Hz |
8.0 µV/√Hz |
[4]
|
Spectral Noise (10 Hz ) (Gain x1) |
1.5 µV/√Hz |
1.5 µV/√Hz |
[4]
|
Spectral Noise (100 Hz ) (Gain x1) |
1.0 µV/√Hz |
1.0 µV/√Hz |
[4]
|
Spectral Noise (1 kHz ) (Gain x1) |
1.0 µV/√Hz |
1.0 µV/√Hz |
[4]
|
Spectral Noise (10 kHz ) (Gain x1) |
1.0 µV/√Hz |
1.0 µV/√Hz |
[4]
|
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) |
75 µV rms |
75 µV rms |
[4]
|
Spectral Noise (1 Hz ) (Gain x10) |
20 µV/√Hz |
20 µV/√Hz |
[4]
|
Spectral Noise (10 Hz ) (Gain x10) |
1.5 µV/√Hz |
1.5 µV/√Hz |
[4]
|
Spectral Noise (100 Hz ) (Gain x10) |
1.0 µV/√Hz |
1.0 µV/√Hz |
[4]
|
Spectral Noise (1 kHz ) (Gain x10) |
1.0 µV/√Hz |
1.0 µV/√Hz |
[4]
|
Spectral Noise (10 kHz ) (Gain x10) |
1.0 µV/√Hz |
1.0 µV/√Hz |
[4]
|
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) |
350 µV rms |
350 µV rms |
[4]
|
Spectral Noise (1 Hz ) (Gain x100) |
100.0 µV/√Hz |
100.0 µV/√Hz |
[4]
|
Spectral Noise (10 Hz ) (Gain x100) |
10.0 µV/√Hz |
10.0 µV/√Hz |
[4]
|
Spectral Noise (100 Hz ) (Gain x100) |
8.0 µV/√Hz |
8.0 µV/√Hz |
[4]
|
Spectral Noise (1 kHz ) (Gain x100) |
6.0 µV/√Hz |
6.0 µV/√Hz |
[4]
|
Broadband Electrical Noise (1 to 10000 Hz) (0.1 mV/pC & Gain x1) |
52.0 µV/rms |
52.0 µV/rms |
[4]
|
Spectral Noise (10 kHz ) (Gain x100) |
6.0 µV/√Hz |
6.0 µV/√Hz |
[4]
|
Spectral Noise (1 Hz) (0.1 mV/pC & Gain x1) |
10.0 µV/√Hz |
10.0 µV/√Hz |
[4]
|
Spectral Noise (10 Hz) (0.1 mV/pC & Gain x1) |
1.5 µV/√Hz |
1.5 µV/√Hz |
[4]
|
Spectral Noise (100 Hz) (0.1 mV/pC & Gain x1) |
0.6 µV/√Hz |
0.6 µV/√Hz |
[4]
|
Spectral Noise (1000 Hz) (0.1 mV/pC & Gain x1) |
0.6 µV/√Hz |
0.6 µV/√Hz |
[4]
|
Spectral Noise (10000 Hz) (0.1 mV/pC & Gain x1) |
0.6 µV/√Hz |
0.6 µV/√Hz |
[4]
|
Broadband Electrical Noise (1 to 10000 Hz) (1.0 mV/pC & Gain x1) |
52.0 µV rms |
52.0 µV rms |
[4]
|
Spectral Noise (1 Hz) (1.0 mV/pC & Gain x1) |
14.0 µV/√Hz |
14.0 µV/√Hz |
[4]
|
Spectral Noise (10 Hz) (1.0 mV/pC & Gain x1) |
2.0 µV/√Hz |
2.0 µV/√Hz |
[4]
|
Spectral Noise (100 Hz) (1.0 mV/pC & Gain x1) |
0.7 µV/√Hz |
0.7 µV/√Hz |
[4]
|
Spectral Noise (1000 Hz) (1.0 mV/pC & Gain x1) |
0.7 µV/√Hz |
0.7 µV/√Hz |
[4]
|
Spectral Noise (10000 Hz) (1.0 mV/pC & Gain x1) |
0.7 µV/√Hz |
0.7 µV/√Hz |
[4]
|
Broadband Electrical Noise (1 to 10000 Hz) (10.0 mV/pC & Gain x1) |
56.0 µV rms |
56.0 µV rms |
[4]
|
Spectral Noise (1 Hz) (10.0 mV/pC & Gain x1) |
15.0 µV/√Hz |
15.0 µV/√Hz |
[4]
|
Spectral Noise (10 Hz) (10.0 mV/pC & Gain x1) |
2.0 µV/√Hz |
2.0 µV/√Hz |
[4]
|
Spectral Noise (100 Hz) (10.0 mV/pC & Gain x1) |
0.6 µV/√Hz |
0.6 µV/√Hz |
[4]
|
Spectral Noise (1000 Hz) (10.0 mV/pC & Gain x1) |
0.6 µV/√Hz |
0.6 µV/√Hz |
[4]
|
Spectral Noise (10000 Hz) (10.0 mV/pC & Gain x1) |
0.6 µV/√Hz |
0.6 µV/√Hz |
[4]
|
Calibration Input (±1 %) |
±1000 pC/V |
±1000 pC/V |
|
Overload Threshold (±0.2 Vpk) |
+10 Vpk |
+10 Vpk |
|
Physical |
Electrical Connector (ICP® Sensor Input) |
BNC Jack |
BNC Jack |
|
Electrical Connector (Charge Sensor Input) |
BNC Jack |
BNC Jack |
|
Electrical Connector (Output) |
BNC Jack |
BNC Jack |
|
Electrical Connector (DC Power Input) |
6-socket mini DIN (female) |
6-socket mini DIN (female) |
|
Electrical Connector (Charge Calibration Input) |
BNC Jack |
BNC Jack |
|
Electrical Connector (RS-232 Digital Control) |
DB-9 Connector |
DB-9 Connector |
|
Size - Height |
3.2 in |
8.1 cm |
|
Size - Width |
8.0 in |
20 cm |
|
Size - Depth |
5.9 in |
15 cm |
|
Weight |
2.40 lb |
1089 gm |
|