Products

ring-style, high sensitivity, ceramic shear icp® accel., 1 v/g, 1 to 10k hz, 10-32 side conn.

Accelerometer, ICP®

Model 355B04

Add to Quote
  • CE
  • IP

Ring-style, high sensitivity, ceramic shear ICP® accel., 1 V/g, 1 to 10k Hz, 10-32 side conn.

The high sensitivity and low noise allows for measurement of micro-vibration.
  • Sensitivity: (±10%)1000 mV/g (101.9 mV/(m/s²))
  • Measurement Range: ±5 g pk (±49 m/s² pk)
  • Broadband Resolution: 0.0001 g rms (0.001 m/s² rms)
  • Frequency Range: (±5%)1 to 8000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.4 oz (11.2 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 1000 mV/g 101.9 mV/(m/s²)
Measurement Range ±5 g pk ±49 m/s² pk
Frequency Range (±5 %) 1 to 8000 Hz 1 to 8000 Hz
Frequency Range (±10 %) 0.6 to 12000 Hz 0.6 to 12000 Hz
Frequency Range (±3 dB) 0.3 to 17000 Hz 0.3 to 17000 Hz
Resonant Frequency ≥30 kHz ≥30 kHz
Broadband Resolution (1) 0.0001 g rms 0.001 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 % [3]
Environmental
Overload Limit ±5000 g pk ±49000 m/s² pk
Temperature Range -65 to +200 °F -54 to +93 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Base Strain Sensitivity 0.05 g/µε 0.49 (m/s²)/µε [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 4 mA 2 to 4 mA
Output Impedance ≤1000 Ohm ≤1000 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.5 to 2.0 sec 0.5 to 2.0 sec
Spectral Noise (10 Hz) 4 µg/√Hz 39 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 2 µg/√Hz 20 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 0.5 µg/√Hz 4.9 (µm/sec2)/√Hz [2]
Electrical Isolation (Base) >100000000 Ohm >100000000 Ohm
Physical
Size - Length 0.95 in 24.1 mm
Size - Width 0.63 in 16.0 mm
Weight 0.4 oz 11.2 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side
Mounting Through Hole Through Hole

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
039A22 Allen wrench, 7/64" hex head (for use with 6-32 thd cap screws) 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
081B45 Off ground socket head cap screw assembly, 6-32 UNC-2A thd., 0.63 length, stainless steel. 1
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1

Optional Versions

(M) Metric Mount
Accessories:
Supplied M081B45 Accessory for Vibration Division Product 1
Supplied M039A22 Allen wrench for use with M3 thread 1

(W) Water Resistant Cable

English SI
Electrical Connection Position Side