Products

icp® quartz force ring, 80k lb comp., 0.06 mv/lb

Force Sensor, ICP®

Model 206C

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
4	Lead Time for 1-3 is 10 Wks.

ICP® quartz force ring, 80k lb comp., 0.06 mV/lb

Measurement Range: 80000 lb (355.86 kN)
Sensitivity: (±15%)0.06 mV/lb (13.5 mV/kN)
Low Frequency Response: (-5%)0.0003 Hz
Upper Frequency Limit: 40000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	0.06 mV/lb	13.5 mV/kN
Measurement Range (Compression)	80000 lb	355.86 kN
Maximum Static Force (Compression)	90000 lb	400.34 kN
Broadband Resolution (1)	1.8 lb-rms	8.0 N-rms	[2]
Low Frequency Response (-5 %)	0.0003 Hz	0.0003 Hz	[3]
Upper Frequency Limit	40000 Hz	40000 Hz	[4]
Non-Linearity	≤1 % FS	≤1 % FS	[1]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.11 %/°F	≤0.198 %/°C
Electrical
Discharge Time Constant (at room temp)	≥2000 sec	≥2000 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Spectral Noise (1 Hz)	0.16 lb/√Hz	0.71 N/√Hz	[2]
Spectral Noise (10 Hz)	0.050 lb/√Hz	0.22 N√Hz	[2]
Spectral Noise (100 Hz)	0.014 lb/√Hz	0.0625 N/√Hz	[2]
Spectral Noise (1000 Hz)	0.0036 lb/√Hz	0.0160 N/√Hz	[2]
Output Polarity (Compression)	Positive	Positive
Physical
Preload	16000 lb	71.172 kN
Stiffness	74 lb/µin	13 kN/µm	[2]
Size - Diameter	2.05 in	52.1 mm
Size - Height	0.590 in	15 mm
Size - Bolt Diameter	1 in	24 mm
Size - ID (Hole Diameter)	1.025 in	26 mm
Size - OD (Sensor)	2.05 in	52 mm
Size - Sensing Surface	1.750 in	44.4 mm
Weight	5.5 oz	155 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A82	Assembly lubricant (for Series 201-207 force rings)	1
081A16	Mounting stud, 7/8-14 x 1.900", BeCu for Models 206C & 216B	1
082B06	Anti-friction washer for Models (M)206C, (M)216B, (M)260A03, (M)260A13 & (M)260A33	1
083B06	Pilot bushing for Models 206C & 216B	1