Products

impact icp® quartz force sensor, 5k lb comp., 1 mv/lb

Force Sensor, ICP®

Model 200B05

Impact ICP® quartz force sensor, 5k lb comp., 1 mV/lb

***Replaced by 208C05***

Measurement Range: 5000 lb (22.24 kN)
Sensitivity: (±15%)1 mV/lb (224.82 mV/kN)
Low Frequency Response: (-5%)0.0003 Hz
Upper Frequency Limit: 75000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)
Mounting Thread: 10-32 Female

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	1 mV/lb	224.82 mV/kN
Measurement Range (Compression)	5000 lb	22.24 kN
Maximum Static Force (Compression)	8000 lb	35.59 kN
Broadband Resolution (1)	0.10 lb-rms	0.4448 N-rms	[2]
Low Frequency Response (-5 %)	0.0003 Hz	0.0003 Hz	[1]
Upper Frequency Limit	75000 Hz	75000 Hz	[4]
Non-Linearity	≤1 % FS	≤1 % FS	[3]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.03 %/°F	≤0.054 %/°C
Electrical
Discharge Time Constant (at room temp)	≥2000 sec	≥2000 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Output Polarity (Compression)	Positive	Positive
Physical
Stiffness	11 lb/µin	1.9 kN/µm	[2]
Size - Diameter	0.650 in	16.51 mm
Size - Height	0.360 in	9.14 mm
Size - Sensing Surface	0.500 in	12.7 mm
Weight	0.5 oz	14 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting Thread	10-32 Female	10-32 Female

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81	Thread lock adhesive (for Series 200)	1
081B05	Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder	1
084A83	Rubber impact pad	1
M081A62	Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu	1