Products

pcb l&t fastener force washer, metric, m18, 180 kn (40.5 klbf), 5-ft integral cable w/pigtails

LOAD WASHER LOAD CELL - M18 FASTENER

Model 054218-01184

PCB L&T Fastener Force Washer, Metric, M18, 180 kN (40.5 klbf), 5-ft Integral Cable w/pigtails

For more information on RS Technologies Fastener Testing products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology/fastener-testing

To view the RS Technologies Fastener Testing Product Catalog, please visit:
https://www.pcb.com/Contentstore/MktgContent/LinkedDocuments/Force-Torque/RS_Fast_Testing_Lowres.pdf

Measurement Range: 40465 lb (180 kN)
Sensitivity: 1.50 mV/V
Size - Diameter: 1.62 in (41.15 mm)
Size - Height: 0.595 in (15.11 mm)

Specification Notes

[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] See Outline Drawing (LT30776) for Complete Dimensions

	English:	SI:
Performance
Measurement Range (Full Scale Capacity)	40465 lb	180 kN	[1]
Sensitivity (output at rated capacity)	1.50 mV/V	1.50 mV/V	[1] [2]
Non-Linearity	±5 % FS	±5 % FS	[2]
Hysteresis	±5 % FS	±5 % FS	[2]
Non-Repeatability	±2 % FS	±2 % FS	[2]
Resonant Frequency	10 kHz	10 kHz
Environmental
Overload Limit	60698 lb	270 kN
Temperature Range (Operating)	0 to +200 °F	-18 to +93 °C
Temperature Range (Compensated)	+70 to +170 °F	+21 to +77 °C
Temperature Effect on Output (Maximum)	±0.002 %Reading/°F	±0.0018 %Reading/°C	[3]
Temperature Effect on Zero Balance (Maximum)	±0.002 %FS/°F	±0.0018 %FS/°C	[2]
Electrical
Bridge Resistance	350 Ohm	350 Ohm	[1]
Excitation Voltage (Recommended)	10 VDC	10 VDC	[4]
Zero Balance	≤1 % FS	≤1 % FS
Output Polarity (Compression)	Positive	Positive
Isolation Resistance	≥1G Ohm	≥1G Ohm
Physical
Size - Height	0.595 in	15.11 mm	[5]
Size - Diameter	1.62 in	41.15 mm
Fastener Size	NO EQUIV	18 mm
Through Hole Diameter	0.715 in	18.16 mm
Sensing Element	Strain Gage	Strain Gage
Electrical Connector	Pigtail Ends	Pigtail Ends
Electrical Connection Position	Side	Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Optional
080922-01000	Model 922 Portable Digital Peak Meter for measuring torque, torque and angle, or load measurement. Click-wrench calc feature and multi-limit sets. Complete with battery charger, data transfer software, and instruction manual	0
080962-01000	Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case	0
Supplied
7122R-007502		1
92160-032558		1
92160-032559		1