Products

high sensitivity, ceramic shear icp® accel., 100 mv/g, 0.5 hz to 10k hz, 10-32 top conn., teds 1.0

Accelerometer, ICP®

Model TLD352C34

High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, 10-32 top conn., TEDS 1.0

Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
Measurement Range: ±50 g pk (±490 m/s² pk)
Broadband Resolution: 0.00015 g rms (0.0015 m/s² rms)
Frequency Range: (±5%)0.5 to 10000 Hz
Sensing Element: Ceramic
Weight: 0.20 oz (5.8 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] 200°F to 325°F data valid with HT option only.
[2] Typical.
[4] TEDS option adds 1.0 VDC to bias voltage.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	100 mV/g	10.2 mV/(m/s²)
Measurement Range	±50 g pk	±490 m/s² pk
Frequency Range (±5 %)	0.5 to 10000 Hz	0.5 to 10000 Hz
Frequency Range (±10 %)	0.3 to 15000 Hz	0.3 to 15000 Hz
Resonant Frequency	≥50 kHz	≥50 kHz
Broadband Resolution (1)	0.00015 g rms	0.0015 m/s² rms	[2]
Non-Linearity	≤1 %	≤1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±5000 g pk	±49000 m/s² pk
Temperature Range (Operating)	-65 to +200 °F	-54 to +93 °C	[3]
Temperature Response	See Graph %/°F	See Graph %/°F	[2]
Base Strain Sensitivity	0.003 g/µε	0.029 (m/s²)/µε	[2]
Electrical
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	7 to 12 VDC	7 to 12 VDC
Discharge Time Constant	1.0 to 2.5 sec	1.0 to 2.5 sec
Settling Time (within 10% of bias)	<10 sec	<10 sec
Spectral Noise (1 Hz)	39 µg/√Hz	380 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	11 µg/√Hz	110 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	3.4 µg/√Hz	33 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	1.4 µg/√Hz	14 (µm/sec²)/√Hz	[2]
Physical
Size - Height	0.88 in	22.4 mm
Size - Hex	0.44 in	11.2 mm
Weight	0.20 oz	5.8 gm	[2]
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Top	Top
Mounting Thread	10-32 Female	10-32 Female
Mounting Torque	10 to 20 in-lb	113 to 226 N-cm

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-1	Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable	1
080A	Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/isolation hardcoat finish	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
081B05	Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder	1
M081B05	Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu	1

Optional Versions

(HT) High temperature, extends normal operation temperatures

	English	SI
Frequency Range	6 to 10000 Hz	6 to 10000
Frequency Range	4.5 to 15000 Hz	4.5 to 15000
Temperature Range	-65 to +325 °F	-54 to +163 °C
Discharge Time Constant	0.07 to 0.15 sec
Broadband Resolution	0.0009 g rms	0.009 m/s² rms
Spectral Noise	107 µg/√Hz	1050 (µm/sec²)/√Hz
Spectral Noise	58 µg/√Hz	570 (µm/sec²)/√Hz
Spectral Noise	41 µg/√Hz	400 (µm/sec²)/√Hz
Spectral Noise	9.8 µg/√Hz	96 (µm/sec²)/√Hz
Output Bias Voltage	10 to 15 VDC
Excitation Voltage	22 to 30 VDC

(J) Ground Isolated

	English	SI
Weight	0.21 oz	6.0 gm
Frequency Range	0.5 to 9000 Hz
Electrical Isolation	>100000000 Ohm
Size - Hex	0.44 in	11.2 mm
Frequency Range	0.3 to 14000 Hz
Resonant Frequency	40 kHz
Size - Height	0.93 in	23.6 mm