Products

1/2 prepolarized free field condenser microphone, with 1/2 icp® ht426e01 preamplifier

ICP Microphone System

Model HT378A06

  • CE
  • IP

1/2" prepolarized free field condenser microphone, with 1/2" ICP® HT426E01 preamplifier

  • Nominal Microphone Diameter: 1/2"
  • Frequency Response Characteristic: Free-Field
  • Frequency Range: (±3dB)3.15 to 40000 Hz
  • Dynamic Range: 153 dB re 20 µPa

Specification Notes


[1] Typical.
[2] TEDS Capable Digital Memory and Communication, compliant with IEEE 1451.4
[3] re 250 Hz
[1] Typical.
[3] re 250 Hz
[4] Prepolarized
[1] Typical.
[5] Venting through Preamp.
[6] See PCB Declaration of Conformance PS065 for details.

English: SI:
Performance
Nominal Microphone Diameter 1/2" 1/2"
Frequency Response Characteristic Free-Field Free-Field
Sensitivity (±2 dB) -38 dB re 1 V/Pa -38 dB re 1 V/Pa [3]
Sensitivity 12.6 mV/Pa 12.6 mV/Pa [3]
Frequency Range (±3 dB) 3.15 to 40000 Hz 3.15 to 40000 Hz
Frequency Range (±2 dB) 3.15 to 31500 Hz 3.15 to 31500 Hz
Frequency Range (±1 dB) 5 to 16000 Hz 5 to 16000 Hz
Lower Limiting Frequency (3) 1.0 to 2.4 Hz 1.0 to 2.4 Hz
Inherent Noise 23 dB(A) re 20 µPa 23 dB(A) re 20 µPa [1]
Dynamic Range (3% Distortion Limit) 153 dB re 20 µPa 153 dB re 20 µPa [1]
TEDS Compliant Yes Yes [2]
Environmental
Temperature Range (Operating) -40 to +248 °F -40 to +120 °C
Temperature Coefficient of Sensitivity (+14 to +158°F (-10 to +70°C)) 0.003 dB/°F 0.006 dB/°C [1] [3]
Static Pressure Coefficient -0.007 dB/kPa -0.007 dB/kPa [1] [3]
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) 0.002 dB/%RH 0.002 dB/%RH [1] [3]
Influence of Axial Vibration (0.1g (1 m/s²)) 66 dB re 20 µPa 66 dB re 20 µPa [1]
Electrical
Polarization Voltage 0 V 0 V [4]
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Bias Voltage 10 to 14 VDC 10 to 14 VDC
Maximum Output Voltage ±7 Vpk ±7 Vpk
Output Impedance <50 Ohm <50 Ohm
Physical
Housing Material Stainless Alloy Stainless Alloy
Venting Rear Rear [5]
Electrical Connector BNC Jack BNC Jack
Mounting Thread (Grid) 0.5 - 60 UNS 0.5 - 60 UNS
Size - Diameter (with grid) 0.52 in 13.2 mm
Size - Diameter (without grid) 0.50 in 12.7 mm
Size - Height (with grid) 3.74 in 95 mm
Size - Height (without grid) 3.72 in 94.5 mm
Weight 1.69 oz 48 gm [1]

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-63 Calibration for microphone/preamplifier with TEDS programming 1

Product Videos


Build Out Your Measurement Chain


079A06
Model: 079A06

Windscreen (for 1/2-inch microphones)

$40.00 USD

(Pricing valid only in the U.S.)

079A11
Model: 079A11

Microphone holder (for 1/2-inch micropho...

$50.00 USD

(Pricing valid only in the U.S.)

079A18
Model: 079A18

Clamp-on flexible extension arm

$150.00 USD

(Pricing valid only in the U.S.)