Products

ring-style, general purpose, ceramic shear icp® accel., 10 mv/g, 1 to 10k hz, 10-32 side conn., through hole mtg with m3x0.5x16mm insulated cap screw, ground isolated

Accelerometer, ICP®

Model M355B02

Ring-style, general purpose, ceramic shear ICP® accel., 10 mV/g, 1 to 10k Hz, 10-32 side conn., through hole mtg with M3x0.5x16mm insulated cap screw, ground isolated

Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
Measurement Range: ±500 g pk (±4900 m/s² pk)
Broadband Resolution: 0.0005 g rms (0.005 m/s² rms)
Frequency Range: (±5%)1 to 10000 Hz
Sensing Element: Ceramic
Weight: 0.35 oz (10 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	10 mV/g	1.02 mV/(m/s²)
Measurement Range	±500 g pk	±4900 m/s² pk
Frequency Range (±5 %)	1 to 10000 Hz	1 to 10000 Hz
Frequency Range (±10 %)	0.6 to 12000 Hz	0.6 to 12000 Hz
Frequency Range (±3 dB)	0.3 to 17000 Hz	0.3 to 17000 Hz
Resonant Frequency	≥35 kHz	≥35 kHz
Broadband Resolution (1)	0.0005 g rms	0.005 m/s² rms	[2]
Non-Linearity	≤1 %	≤1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %	[3]
Environmental
Overload Limit	±5000 g pk	±49000 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[2]
Base Strain Sensitivity	0.05 g/µε	0.49 (m/s²)/µε	[2]
Electrical
Excitation Voltage	22 to 30 VDC	22 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	7 to 15 VDC	7 to 15 VDC
Discharge Time Constant	0.5 to 2 sec	0.5 to 2 sec
Settling Time (within 10% of bias)	<10 sec	<10 sec
Spectral Noise (1 Hz)	90 µg/√Hz	880 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	15 µg/√Hz	147 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	5 µg/√Hz	49 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	3 µg/√Hz	29 (µm/sec²)/√Hz	[2]
Electrical Isolation (Base)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Height	0.40 in	10.2 mm
Size - Length	0.95 in	24.1 mm
Size - Width	0.63 in	16.0 mm
Weight	0.35 oz	10 gm	[2]
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting	Through Hole	Through Hole

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
039A22	Allen wrench, 7/64" hex head (for use with 6-32 thd cap screws)	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
081B45	Off ground socket head cap screw assembly, 6-32 UNC-2A thd., 0.63 length, stainless steel.	1
ACS-1	Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable	1