Products

low cost embeddable accelerometer, 2-wire icp®, 1 mv/g, low profile to5 housing, negative output, header pins

ICP® Low-Profile TO-5 ACCELEROMETER

Model 66162ANZ1

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Low cost embeddable accelerometer, 2-wire ICP®, 1 mV/g, low profile TO5 housing, negative output, header pins

  • Sensitivity: (±20%)1 mV/g (0.10 mV/(m/s²))
  • Frequency Range: (±3dB)0.5 to 10000 Hz (0.5 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: 5000 g pk (50000 m/s² pk)
  • Weight: 0.08 oz (2.2 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] Negative output along Z-axis (in upward direction when pin mounted).
[6] Performance depends on mounting
[4] Typical.
[7] See PCB Declaration of Conformance PS023 or PS060 for details.

English: SI:
Performance
Sensitivity (±20 %) 1 mV/g 0.10 mV/(m/s²) [1] [5]
Measurement Range 5000 g pk 50000 m/s² pk
Frequency Range (±3 dB) 0.5 to 10000 Hz 0.5 to 10000 Hz [3] [6]
Resonant Frequency >25 kHz >25 kHz [6]
Broadband Resolution 4.6 µg 45 µm/sec2 [4]
Non-Linearity ≤1 % ≤1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49000 m/s² pk
Temperature Range (Operating) -65 to +185 °F -54 to +85 °C
Temperature Response See Graph See Graph [4]
Electrical
Settling Time (within 1% of bias) ≤2 sec ≤2 sec
Discharge Time Constant ≥0.3 sec ≥0.3 sec
Excitation Voltage 18 to 28 VDC 18 to 28 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <100 Ohm <100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Spectral Noise (10 Hz) 229 µg/√Hz 2246 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 61 µg/√Hz 598 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 30 µg/√Hz 294 (µm/sec2)/√Hz [4]
Physical
Size - Lip Diameter 0.36 in 9.1 mm
Size - Height 0.26 in 6.6 mm
Weight 0.08 oz 2.2 gm
Mounting Adhesive/Solder Adhesive/Solder
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector Header Pins Header Pins
Electrical Connection Position Bottom Bottom
Electrical Connections (Pin 1) Signal / Power Signal / Power
Electrical Connections (Chrome-Plated Brass) Neg (-) Ground Neg (-) Ground
Electrical Connections (Pin 3) No Connection No Connection

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1

Optional Versions

(HT) High temperature, extends normal operation temperatures

English SI
Temperature Range -65 to 250 -54 to 121