Products

pcb l&t torkdisc® system, 16-bit telemetry system, 30k in-lb/2,500 ft-lb(3.4 kn-m) rated capacity, 150% static overload protection, 10,000 rpm max., steel alloy

TORKDISC® Rotary Torque Sensing System

Model 5308D-03A

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-1 is 6 Wks.
  • CE
  • IP

PCB L&T TORKDISC® System, 16-bit telemetry system, 30k in-lb/2,500 ft-lb(3.4 kN-m) rated capacity, 150% static overload protection, 10,000 RPM Max., steel alloy

TORKDISC® System comes complete with receiver unit, 24 foot cable, and 12 VDC power supply.
  • Measurement Range: 30000 in-lb (3390 Nm)
  • Temperature Range: +32 to +185 °F (0 to +85 °C)
  • Torsional Stiffness: 100000000 in-lb/radian (11298 N-m/radian)
  • Overload Limit: 35000 in-lb (3955 Nm)
  • Housing Material: Steel Alloy
  • Weight: 10 lb (4.5 kg)

Specification Notes

[1] Request Technical Note FTQ-STN5 regarding digital output signal.
[2] Extraneous load limits reflect the maximum axial load, lateral load, and bending moment that may be applied singularly without electrical or mechanical damage to the sensor.
[3] Where combined extraneous loads are applied, decrease loads proportionally.
[4] Root sum square of non-linearity, hysteresis, and non repeatability.
[5] Selectable High Pass cutoff frequencies of 5, 10, 20, 200 and 500 Hz.
[6] Selectable Low Pass cutoff frequencies of 10,000, 5000, 2500, 1200, 625 and 313 Hz.
[7] Bolt joint slip torque is calculated assuming a coefficient of friction (µ) of 0.1 and that grade 8 socket head cap screws are used and tightened to 75% of yield.
[8] Supplied with universal AC power adaptor.
[9] See PCB Declaration of Conformance PS069 for details.

English: SI:
Performance
Measurement Range (Full Scale Capacity) 30000 in-lb 3390 Nm
Accuracy ±0.10 % FS ±0.10 % FS [4]
Filter Type (High Pass) 2-pole Butterworth 2-pole Butterworth [5] [6]
Filter Type (Low Pass - Anti Alias) 8-pole Elliptical 8-pole Elliptical
Gain (Channel A) 1-16 dB 1-16 dB
Gain (Channel B) 0.3-1.3 dB 0.3-1.3 dB
Voltage Output (channel B - DC coupled) ±10 V ±10 V
Voltage Output (channel A - AC coupled) ±10 V ±10 V
Digital Output QSPI QSPI [1]
Maximum Load (Axial) 4000 lb 17.8 kN [2] [3]
Maximum Load (Lateral) 5000 lb 22.2 kN [2] [3]
Maximum Moment 10000 in-lb 1130 Nm [2] [3]
Accuracy ±0.10 % FS ±0.10 % FS
Frequency Range (-3 dB) 0 to 8500 Hz 0 to 8500 Hz
Environmental
Overload Limit (Bolt Joint Slip) 35000 in-lb 3955 Nm [7]
Overload Limit (Failure) 100000 in-lb 11298 Nm
Overload Limit (Safe) 75000 in-lb 8474 Nm
Temperature Range (Rotor/Stator - Operating) +32 to +185 °F 0 to +85 °C
Temperature Range (Rotor - Compensated) +70 to +170 °F +21 to +77 °C
Temperature Range (Receiver - Operating) 0 to +122 °F -17.7 to 50 °C
Temperature Effect on Output (System - within compensated range) 0.002 %FS/°F 0.0036 %FS/°C
Temperature Effect on Zero Balance (System - within compensated range) 0.002 %FS/°F 0.0036 %FS/°C
Position Sensitivity (180° rotation of sensor) ≤0.1 % FS ≤0.1 % FS
Electrical
Power Required 9 to 18 VDC 9 to 18 VDC [8]
Digital Resolution 16 Bit 16 Bit
Digital Sample Rate 26484 samples/sec 26484 samples/sec
Analog Resolution (based on ±10 V FSO and 16-bit resolution) 0.31 mV 0.31 mV
Physical
Maximum Speed 10000 RPM 10000 RPM
Permissible Axial Float (rotor to stator) 0.25 in 6.4 mm
Permissible Radial Float (rotor to stator) 0.25 in 6.4 mm
Rotating Inertia (without adaptors) 0.643 lb-ft² 0.027 kg-m²
Dynamic Balance per ISO G 2.5 per ISO G 2.5
Torsional Stiffness 100000000 in-lb/radian 11298 N-m/radian
Torsional Angle (at Full Scale Capacity) 0.017 ° 0.017 °
Housing Material (Sensor) Steel Alloy Steel Alloy
Weight (rotor/sensor) 10 lb 4.5 kg

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
012AC024AT 1
182-028A 25-pin(M) D-sub conn. (mating connector for 53xxC Series receiver outputs) 1
M0003978 1