Products

airborne amplifier, 3-channel, +28 vdc aircraft powered, for use with icp® triaxial accelerometers

Airborne Amplifier, 3-Channel ICP® , +28 VDC aircraft powered

Model 485M49

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • IP

Airborne Amplifier, 3-Channel, +28 VDC aircraft powered, for use with ICP® triaxial accelerometers

Airborne Amplifier, Miniature, 3-Channel, for use with ICP® triaxial accelerometers. This signal conditioner is powered by +28 VDC aircraft power supply and has a frequency response from 1 hz to 100 kHz.

    Specification Notes

    [1] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.

    English: SI:
    Performance
    High Frequency Response (-5 %) >100 kHz >100 kHz [1]
    Low Frequency Response (-5 %) <1.0 Hz <1.0 Hz [1]
    Environmental
    Temperature Range -40 to 185 °F -40 to 85 °C
    Electrical
    Supply Voltage 18 to 30 VDC 18 to 30 VDC
    Output VDC(Offset) <10 ±mV <10 ±mV
    Supply Current(for ICP Sensor) (Internal Current Limiter) 4.0 (+/- 1.0) mA DC 4.0 (+/- 1.0) mA DC
    Physical
    Cable Output(Integral) 037 type 24" Long (w/6" S&T BZ)
    Cable Output(Supply Voltage) Violet Violet
    Cable Output(GND) Green Green
    Cable Output(X Axis) Red Red
    Cable Output(Y Axis) Yellow Yellow
    Cable Output(Z Axis) White White
    Cable Sensor(Integral) 010 type Conn # AY PCB Triax 6" Long
    Size - Height 1.45 in 3.68 cm
    Size - Length 0.70 in 1.78 cm
    Size - Width 2.90 in 7.37 cm
    Weight 2.47 oz 70 gm

    * All specifications are at room temperature unless otherwise specified.