Products

triaxial icp® seat pad accel., 100 mv/g, 0.5 to 1000 hz, 5-ft integral cable, conforms to iso 10326-1, no mating cable supplied

Triax ICP® Seat Pad Accelerometer per ISO 10326-1

Model 356B41/NC

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-5 is 4 Wks. Lead Time for 6-10 is 5 Wks.

Triaxial ICP® seat pad accel., 100 mV/g, 0.5 to 1000 Hz, 5-ft integral cable, conforms to ISO 10326-1, no mating cable supplied

Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
Measurement Range: ±10 g pk (±98 m/s² pk)
Electrical Connector: Integral Cable

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Standard calibration to 100 Hz with sensor in mounting pad. Special calibration above 100 Hz available with sensor outside mounting pad.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	100 mV/g	10.2 mV/(m/s²)
Measurement Range	±10 g pk	±98 m/s² pk
Frequency Range (±5 %)	0.5 to 1000 Hz	0.5 to 1000 Hz	[3]
Resonant Frequency	≥27 kHz	≥27 kHz
Broadband Resolution (1)	0.0002 g rms	0.002 m/s² rms	[2]
Non-Linearity	≤1 %	≤1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±2000 g pk	±19620 m/s² pk
Temperature Range	-10 to 122 °F	-23 to 50 °C
Temperature Response	<0.10 %/°F	<0.17 %/°C	[2]
Electrical
Excitation Voltage	6.5 to 30 VDC	6.5 to 30 VDC
Constant Current Excitation	0.3 to 10 mA	0.3 to 10 mA
Output Impedance	≤500 Ohm	≤500 Ohm
Output Bias Voltage	2.8 to 4.5 VDC	2.8 to 4.5 VDC
Discharge Time Constant	1 to 3 sec	1 to 3 sec
Settling Time (within 10% of bias)	<20 sec	<20 sec
Spectral Noise (1 Hz)	50 µg/√Hz	490 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	10 µg/√Hz	98 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	4 µg/√Hz	39 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	2 µg/√Hz	20 (µm/sec²)/√Hz	[2]
Physical
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Diameter	7.87 in	200 mm
Size - Width	0.472 in	12 mm
Weight	9.6 oz	272 gm	[2]
Electrical Connector	Integral Cable	Integral Cable
Electrical Connection Position	Side	Side
Cable Termination	1/4-28 4-Pin Jack	1/4-28 4-Pin Jack
Cable Length	5 ft	1.5 m
Cable Type	010 4-cond Shielded	010 4-cond Shielded
Mounting Thread	5-40 Female	5-40 Female

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-17	Seatpad triaxial amplitude response cal from 0.5 to 100 Hz (for Models 356A40, 356B40, & 356B41)	1
010G05	4-conductor, shielded, FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X,Y,Z)	1
081A90	Mounting stud, 10-32 to 5-40	1