Products

triaxial icp® accelerometer, 100 mv/g, 50 g, 0.5 to 5k hz, 5gm, 5 foot attached cable

Accelerometer, ICP®, Triaxial

Model 356A12

Add to Quote
  • CE
  • IP

Triaxial ICP® accelerometer, 100 mV/g, 50 g, 0.5 to 5k Hz, 5gm, 5 foot attached cable

  • Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
  • Measurement Range: ±50 g pk (±491 m/s² pk)
  • Electrical Connector: Integral Cable

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²)
Measurement Range ±50 g pk ±491 m/s² pk
Frequency Range (±5 %) 0.5 to 5000 Hz 0.5 to 5000 Hz
Frequency Range (±10 %) 0.4 to 6000 Hz 0.4 to 6000 Hz
Resonant Frequency ≥25 kHz ≥25 kHz
Broadband Resolution (1) 0.0002 g rms 0.002 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range (Operating) -65 to +170 °F -54 to +77 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 1 to 3 sec 1 to 3 sec
Settling Time (within 10% of bias) <10 sec <10 sec
Spectral Noise (1 Hz) 50 µg/√Hz 490 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 20 µg/√Hz 196 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 5 µg/√Hz 49 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 2 µg/√Hz 19.8 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 1 µg/√Hz 9.8 (µm/sec2)/√Hz [2]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.45 in 11.4 mm
Size - Length 0.45 in 11.4 mm
Size - Width 0.45 in 11.4 mm
Weight (without cable) 0.19 oz 5.4 gm [2]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Cable Termination 1/4-28 4-Pin Jack 1/4-28 4-Pin Jack
Cable Length 5 ft 1.5 m
Cable Type 034 4-cond Shielded 034 4-cond Shielded
Mounting Thread 5-40 Female 5-40 Female

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
034G05 4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) 1
080A Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/isolation hardcoat finish 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
081A27 Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu 1
081A90 Mounting stud, 10-32 to 5-40 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081A27 Metric mtg stud, 5-40 to M3 x 0.50 long 1

Optional Versions

(A) Adhesive Mount
Accessories:
Supplied 080A90 Quick Bonding Gel 1
Supplied 034G05 Cables 1

(J) Ground Isolated

English SI
Electrical Isolation ≥100000000 Ohm
Size - Height 0.49 in 12.5 mm
Size - Length 0.45 in 11.4 mm
Size - Width 0.49 in 12.5 mm
Weight 0.23 oz 6.5 gm
Mounting Adhesive

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

English SI
Output Bias Voltage 8.5 to 13 VDC
Weight 0.23 oz 6.4 gm
Mounting Adhesive
Frequency Range (&#177;5 %) 0.5 to 4000 Hz
Frequency Range (&#177;10 %) 0.4 to 5000 Hz

(TLB) TEDS LMS International - Automotive Format

English SI
Frequency Range (&#177;5 %) 0.5 to 4000 Hz
Frequency Range (&#177;10 %) 0.4 to 5000 Hz
Output Bias Voltage 8.5 to 13 VDC
Weight 0.23 oz 6.5 gm
Mounting Adhesive

Build Out Your Measurement Chain