Products

pcb l&t fatigue rated load cell low profile, 5 klbf rated capacity 300% overload protection 2.0mv/v output 5/8-18 unf-2b thread  pt02e-10-6p connector with mounting base.

FATIGUE RATED LOW PROFILE LOAD CELL

Model 1403-15A/084A100

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-2 is 3 Wks.
  • IP

PCB L&T fatigue rated load cell low profile, 5 klbf rated capacity 300% overload protection 2.0mv/v output 5/8-18 UNF-2B thread PT02E-10-6P connector with mounting base.

  • Measurement Range: 5000 lb (22 kN)
  • Size - Diameter: 4.12 in (104.6 mm)
  • Size - Height: 2.50 in (63.5 mm)
  • Electrical Connector: PT02E-10-6P

Specification Notes


[1] Nominal.
[2] FS - Full Scale.
[3] RO - Rated Output.
[4] Calibrated in tension and compression.
[5] Performance specifications guaranteed with factory installed optional Tension Base 084A100
[6] Singularly applied, i.e. no other extraneous loads.
[7] Over compensated operating temperature range.
[1] Nominal.
[3] RO - Rated Output.
[8] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[9] See Outline Drawing 49932 for Complete Dimensions

English: SI:
Performance
Measurement Range (100 x 10^6 cycles) 5000 lb 22 kN [2] [4]
Sensitivity (±10 %) (RO) 2.0 mV/V 2.0 mV/V [1] [3]
Non-Linearity ≤0.04 % FS ≤0.04 % FS [2] [5]
Hysteresis ≤0.04 % FS ≤0.04 % FS [2] [5]
Non-Repeatability ≤0.02 %RO ≤0.02 %RO [3] [5]
Creep (in 20 minutes) 0.025 % 0.025 % [5]
Static Error Band ≤0.04 % FS ≤0.04 % FS [2] [5]
Eccentric Load Sensitivity 0.1 %/in 0.1 %/25.4mm [5]
Resonant Frequency 10 kHz 10 kHz
Side Load Sensitivity 0.1 %/in 0.1 %/25.4mm [5]
Environmental
Overload Limit 15 klb 67 kN
Load Limit (Side Force, FX or FY) 10 klbf 44 kN [6]
Load Limit (Bending Moment, MX or MY) 10 klbf-in 1130 Nm [6]
Load Limit (Axial Torque, MZ) 10 klbf-in 1130 Nm [6]
Temperature Range (Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +15 to +115 °F -9 to +46 °C
Temperature Effect on Output (Maximum) ±0.0008 %Reading/°F ±0.0018 %Reading/°C [7]
Temperature Effect on Zero Balance (Maximum) ±0.0008 %FS/°F ±0.0018 %FS/°C [7]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Voltage (Recommended) 10 VDC 10 VDC [8]
Insulation Resistance >5k GOhm >5k GOhm
Zero Balance ±1 %RO ±1 %RO [3]
Output Polarity +Tension +Tension
Physical
Size - Height 2.50 in 63.5 mm [9]
Size - Diameter 4.12 in 104.6 mm [9]
Weight 6.4 lb 2.9 kg
Mounting Thread 5/8 - 18 UNF-3B No Metric Equivalent
Housing Material Painted Steel Painted Steel
Sensing Element Strain Gage Strain Gage
Mounting Torque 200 lbf-in 23 Nm
Deflection at Full Scale Capacity 0.001 in 0.025 mm
Electrical Connector PT02E-10-6P PT02E-10-6P

* All specifications are at room temperature unless otherwise specified.

Accessories


Optional
084A100 Tension Load Base w/ 5/8-18 UNF-3B 1
084A55 Load cell thread pre-tensioner 5/8-18 1
084A90 Connector Protector, 1200 & 1400 Series 1
181-012A PT06A-10-6S (SR) 1
8311-01-10A 4-conductor, PT06A-10-6S to pigtails cable, 10-ft, for Reaction Torque and Load Cells with PT connector (& 8162 Series), <20 ft 1