Products

load cell, s-type, 5000n 5000 ohm m10 x 1 thd

Strain Gage Load Cell

Model 045000-02502

Add to Quote
  • IP

Load Cell, S-Type, 5000N 5000 Ohm M10 x 1 Thd

  • Measurement Range: 1124 lb (5000 N)
  • Size - Height: 3.0 in (76.2 mm)
  • Electrical Connector: 6 ft. Integrated Cable

Specification Notes

[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.

English: SI:
Performance
Measurement Range 1124 lb 5000 N [1]
Sensitivity (±10 %) 2 mV/V 2 mV/V [2]
Non-Linearity ≤0.15 % FS ≤0.15 % FS
Hysteresis ≤0.15 % FS ≤0.15 % FS
Non-Repeatability ≤0.05 %RO ≤0.05 %RO
Creep (in 20 minutes) ≤0.02 % ≤0.02 %
Resonant Frequency 3.2 kHz 3.2 kHz
Environmental
Overload Limit 1686 lb 7500 N
Load Limit (Side Force, FX or FY) 112.4 lb 500 N [3]
Load Limit (Bending Moment, MX or MY) 225 in-lb 25.4 Nm [3]
Load Limit (Axial Torque, MZ) 225 in-lb 25.4 Nm [3]
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +75 to +150 °F +21 to +65 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0036 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.0015 %FS/°F ±0.027 %FS/°C [4]
Electrical
Bridge Resistance 5000 Ohm 5000 Ohm [5]
Excitation Voltage (Recommended) 10 VDC 10 VDC [6]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity + Tension + Tension
Physical
Size - Height 3.0 in 76.2 mm
Size - Width 1.0 in 25.4 mm
Size - Length 2.0 in 51.0 mm
Weight 0.43 lb 195 g
Housing Material Aluminum Aluminum
Sensing Element Strain Gage Strain Gage
Deflection at Full Scale Capacity 0.0025 in 0.05 mm
Electrical Connector 6 ft. Integrated Cable 6 ft. Integrated Cable
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.