modal array, ceramic shear icp® accel, 100 mv/g, 0.5 to 3k hz 10-32 side conn stud mount with ieee 1451.4 teds 1.0

Accelerometer, ICP®

Model TLD333B30

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
19	Lead Time for 1-10 is 4 Wks. Lead Time for 11-20 is 5 Wks.

Modal array, ceramic shear ICP® accel, 100 mV/g, 0.5 to 3k Hz 10-32 side conn stud mount with IEEE 1451.4 TEDS 1.0

Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
Measurement Range: ±50 g pk (±490 m/s² pk)
Broadband Resolution: 0.00015 g rms (0.0015 m/s² rms)
Frequency Range: (±5%)0.5 to 3000 Hz
Sensing Element: Ceramic
Weight: 0.14 oz (4.0 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±10 %)	100 mV/g	10.2 mV/(m/s²)
Measurement Range	±50 g pk	±490 m/s² pk
Frequency Range (±5 %)	0.5 to 3000 Hz	0.5 to 3000 Hz
Resonant Frequency	≥40 kHz	≥40 kHz
Phase Response (±5 °) (at 70°F [21°C])	2 to 3000 Hz	2 to 3000 Hz
Broadband Resolution (1)	0.00015 g rms	0.0015 m/s² rms	[2]
Non-Linearity	≤1 %	≤1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %	[3]
Environmental
Overload Limit (Shock)	±5000 g pk	±49000 m/s² pk
Temperature Range (Operating)	0 to +150 °F	-18 to +66 °C
Temperature Response	See Graph %/°F	See Graph %/°F
Base Strain Sensitivity	0.01 g/µε	0.1 (m/s²)/µε	[2]
Electrical
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤300 Ohm	≤300 Ohm
Output Bias Voltage	7 to 12 VDC	7 to 12 VDC
Discharge Time Constant	1.0 to 3.0 sec	1.0 to 3.0 sec
Settling Time (within 10% of bias)	<12 sec	<12 sec
Spectral Noise (1 Hz)	39 µg/√Hz	380 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	11 µg/√Hz	110 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	3.4 µg/√Hz	33 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	1.4 µg/√Hz	14 (µm/sec²)/√Hz	[2]
Physical
Size - Height	0.40 in	10.2 mm
Size - Length	0.63 in	16.0 mm
Size - Width	0.40 in	10.2 mm
Weight	0.14 oz	4.0 gm	[2]
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting Thread	5-40 Female	5-40 Female
Mounting Torque	4 to 5 in-lb	45 to 56 N-cm

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A25	Adhesive base, 0.438" hex, 5-40 tapped hole, aluminum hardcoat (for Series 333B30/B40/B50)	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)	1
081A27	Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu	1
ACS-1	Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable	1
M081A27	Metric mtg stud, 5-40 to M3 x 0.50 long	1