Vibration Switch

Model 686C01

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
9	Lead Time for 1-5 is 3 Wks. Lead Time for 6-10 is 4 Wks.

USB-programmable electronic vibration switch, relay output, 0.25 to 5 in/sec pk, 2 to 1k Hz, top exit, 2-pin conn

The 686C01 Smart Vibration Switch is a low cost versatile and fully USB Programmable electronic vibration switch that replaces unreliable mechanical vibration switches. It is also a significantly lower cost alternative for many electronic vibration switch applications.

Relay: (Type)SPST, Form A or B MOSFET
Power Required: 24 to 240 V DC/AC 50/60 Hz
Electrical Connector: 2-Pin MIL-C-5015

Specification Notes

[1] USB Programmable - See configuration sheet supplied with switch for exact setting.
[2] See PCB Declaration of Conformance PS096 for details.

	English:	SI:
Performance
Alarm Threshold (±10 %)	0.25 to 5 in/sec pk	4.5 to 90 mm/s rms	[1]
Frequency Range (±3 dB)	120 to 60 kcpm	2 to 1000 Hz
Hysteresis (% < Alarm Threshold)	3; 6; or 10 %	3; 6; or 10 %	[1]
Residual Vibration Level (Reference)	Dependent or Independent	Dependent or Independent	[1]
Residual Vibration Level (% Alarm Threshold)	1 to 40 %	1 to 40 %	[1]
MAVT (Sets Alarm Threshold to 2X actual vibration)	Enabled or Disabled	Enabled or Disabled	[1]
Transverse Sensitivity	<7 %	<7 %
Power On Delay (±1 sec)	3 or 20 sec	3 or 20 sec	[1]
Startup Delay (±1 sec or 1 min ) (Time)	1 to 60 sec or 1 to 30 min	1 to 60 sec or 1 to 30 min	[1]
Startup Delay (x Alarm Threshold)	x2; x4; x8; Blocked	x2; x4; x8; Blocked	[1]
Startup Delay (Active)	Enabled or Disabled	Enabled or Disabled	[1]
Operational Delay (±1 sec)	1 to 60 sec	1 to 60 sec	[1]
Relay(Type)	SPST, Form A or B MOSFET	SPST, Form A or B MOSFET
Relay(Latching)	Latching / Non-Latching	Latching / Non-Latching	[1]
Relay(Contacts)	Normally Open / Closed	Normally Open / Closed	[1]
Environmental
Temperature Range (Operating)	-40 to 185 °F	-40 to 85 °C
Temperature Range (Storage)	-40 to 257 °F	-40 to 125 °C
Overload Limit (Shock)	5000 g pk	49050 m/s² pk
Enclosure Rating	IP68	IP68
Electrical
Power Required	24 to 240 V DC/AC 50/60 Hz	24 to 240 V DC/AC 50/60 Hz
Current Rating (Relay Closed)	500 mA	500 mA
Leak Current (Relay Open)	≤1 mA	≤1 mA
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Hex	1.25 in	1.25 in
Size - Height	2.6 in	66 mm
Weight	5.2 oz	148 gm
Mounting Torque	3 to 5 ft-lb	4 to 7 Nm
Mounting Thread	1/4-28 Female	1/4-28 Female
Sensing Element (Internal)	Piezoelectric Accelerometer	Piezoelectric Accelerometer
Housing Material	Stainless Steel	Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	2-Pin MIL-C-5015	2-Pin MIL-C-5015
Electrical Connection Position	Top	Top

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A41	Mounting stud, 1/4-28 x 0.563" long stainless steel screw with hex socket and brass tip	1
M081A61	Mounting stud, 1/4-28 to M6x1 x 8.6 mm long, BeCu w/shoulder	1