industrial icp® accel, top exit, 10 meter integral cable, blunt cut, micropower pellet 50 mv/g

INDUSTRIAL 3-WIRE LOW POWER ACCELEROMETER

Model 608M93/M010BZ

Industrial ICP® accel, top exit, 10 meter integral cable, blunt cut, MicroPower pellet 50 mV/g

Sensitivity: (±20%)50 mV/g (5.1 mV/(m/s²))
Frequency Range: (±3dB)60 to 600000 cpm (1 to 10000 Hz)
Sensing Element: Ceramic
Measurement Range: ±25 g (±245 m/s²)
Weight: 3.5 oz (99.3 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] 1/4-28 has no equivalent in S.I. units.
[5] See PCB Declaration of Conformance PS274 for details

	English:	SI:
Performance
Sensitivity (±20 %)	50 mV/g	5.1 mV/(m/s²)	[1]
Measurement Range	±25 g	±245 m/s²
Frequency Range (±3 dB)	60 to 600000 cpm	1 to 10000 Hz
Resonant Frequency	1320 kcpm	22 kHz	[3]
Broadband Resolution (1)	550 µg	5,396 µm/sec²	[3]
Non-Linearity	±1 %	±1 %	[2]
Transverse Sensitivity	≤7 %	≤7 %
Environmental
Overload Limit (Shock)	5000 g pk	49050 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[3]
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 10% of bias)	350 µs	350 µs
Discharge Time Constant	≥0.16	≥0.16
Excitation Voltage	3 to 5 VDC	3 to 5 VDC
Output Impedance	<1000 Ohm	<1000 Ohm
Current Draw	60 µA	60 µA	[3]
Output Bias Voltage (+/-5 %)	1.5 VDC	1.5 VDC
Spectral Noise (10 Hz)	35 µg/√Hz	343 (µm/sec²)/√Hz	[3]
Spectral Noise (100 Hz)	12 µg/√Hz	118 (µm/sec²)/√Hz	[3]
Spectral Noise (1 kHz)	6 µg/√Hz	59 (µm/sec²)/√Hz	[3]
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Hex	9/16 in	14 mm
Size - Height	2.5 in	64 mm
Weight (with cable)	3.5 oz	99.3 gm
Mounting	Stud	Stud
Mounting Thread	1/4-28 Female	1/4-28 Female	[4]
Mounting Torque	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	316L Stainless Steel	316L Stainless Steel
Sealing	Molded	Molded
Electrical Connector	Molded Integral Cable	Molded Integral Cable
Electrical Connection Position	Top	Top
Electrical Connections (Red)	Pos (+) Power	Pos (+) Power
Electrical Connections (Black)	Ground	Ground
Electrical Connections (White)	Acceleration Output	Acceleration Output
Cable Length	33 ft	10 m
Cable Type	Polyurethane	Polyurethane

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A40	Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip	1
ICS-2	Calibration of industrial accel., single-point, 100 Hz reference sensitivity	1

Optional Versions

(EX) Hazardous Area Approval- contact factory for specific approvals

	English	SI
Hazardous Area Approval	EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4