601a02 with -3db frequency response 0.1hz for wind turbine market in china

INDUSTRIAL ICP® ACCELEROMETER

Model 601M51

Add to Quote
  • CE
  • IP

601A02 with -3dB frequency response 0.1Hz for wind turbine market in China

  • Sensitivity: (±20%)500 mV/g (51 mV/(m/s²))
  • Frequency Range: (±3dB)6 to 180000 cpm (0.1 to 8000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±10 g (±98 m/s²)
  • Weight: 2.8 oz (80 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±20 %) 500 mV/g 51 mV/(m/s²) [1]
Measurement Range ±10 g ±98 m/s²
Frequency Range (±5 %) 17 to 240000 cpm 0.29 to 4000 Hz [3]
Frequency Range (±10 %) 13 to 300000 cpm 0.21 to 5000 Hz
Frequency Range (±3 dB) 6 to 180000 cpm 0.1 to 8000 Hz
Resonant Frequency 960 kcpm 16 kHz [4]
Broadband Resolution (1) 35 µg 343 µm/sec2 [4]
Non-Linearity ±1 % ±1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [4]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 1% of bias) ≤15 sec ≤15 sec
Discharge Time Constant ≥1.6 sec ≥1.6 sec
Excitation Voltage 18 to 28 VDC 18 to 28 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <150 Ohm <150 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Spectral Noise (10 Hz) 3 µg/√Hz 29.4 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 0.7 µg/√Hz 6.9 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 0.5 µg/√Hz 4.9 (µm/sec2)/√Hz [4]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 7/8 in 22.2 mm
Size - Height 1.9 in 48.3 mm
Weight 2.8 oz 80 gm
Mounting Thread 1/4-28 Female 1/4-28 Female [5]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Top Top

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1
M081A61 Mounting stud, 1/4-28 to M6x1 x 8.6 mm long, BeCu w/shoulder 1

Optional Versions

(M) Metric Mount
Accessories:
Supplied M081A61 Mounting Stud 1