8-channel, line-powered, icp® sensor signal cond., internal jumper selectable gain x1, x10, x100, rack mount

Eight-Channel, ICP® Sensor Signal Conditioner

Model 483C15

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-3 is 20 Dys.
Lead Time for 3-5 is 4 Wks.
  • CE
  • IP

8-channel, line-powered, ICP® sensor signal cond., internal jumper selectable gain x1, x10, x100, rack mount

  • Sensor Input Type(s): ICP®, Voltage
  • Channels: 8
  • Voltage Gain: (±1%)x1, x10, x100
  • Power Required: AC Power

Specification Notes

[1] Jumper selectable on internal circuit board.
[2] The low frequency tolerance is accurate within ±25% of the specified frequency.
[3] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[4] Typical.
[1] Jumper selectable on internal circuit board.
[5] User adjustable, factory set at 4 mA (± 0.5 mA). Each control adjusts 4 channels.
[2] The low frequency tolerance is accurate within ±25% of the specified frequency.
[3] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[6] See PCB Declaration of Conformance PS024 for details.

English: SI:
Performance
Channels 8 8
Sensor Input Type(s) ICP®, Voltage ICP®, Voltage [1]
Voltage Gain (±1 %) (at 500 Hz) x1, x10, x100 x1, x10, x100 [1]
Output Range (Maximum) ±10 V ±10 V
Low Frequency Response (-5 %) 0.05 Hz 0.05 Hz [2] [3]
High Frequency Response (-3 dB) (x100) >50000 Hz >50000 Hz
High Frequency Response (-5 %) (x100) >17 kHz >17 kHz
High Frequency Response (-5 %) (x10) >40 kHz >40 kHz
High Frequency Response (-5 %) (x1) >100 kHz >100 kHz
High Frequency Response (-3 dB) (x1,x10) >100 kHz >100 kHz
Phase Response (at 1 kHz) ±1 ° ±1 °
Cross Talk (maximum) -72 dB -72 dB
Fault/Bias Monitor/Meter (LED) Open/Short/Overload Open/Short/Overload
Environmental
Temperature Range (Operating) +32 to +122 °F 0 to +50 °C
Electrical
Power Required AC Power AC Power
AC Power (47 to 63 Hz) 100 to 240 VAC 100 to 240 VAC
AC Power ≤0.7 Amps ≤0.7 Amps
Excitation Voltage (±1 VDC) (To Sensor) +26 VDC +26 VDC
DC Offset <20 mV <20 mV
Constant Current Excitation (To Sensor) 0 to 20 mA 0 to 20 mA [5]
Discharge Time Constant (0 to 50 %) >7 sec >7 sec [2] [3]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 5.6 µV rms 5.6 µV rms [4]
Spectral Noise (1 Hz) 0.67 µV/√Hz 0.67 µV/√Hz [4]
Spectral Noise (10 Hz) 0.10 µV/√Hz 0.10 µV/√Hz [4]
Spectral Noise (100 Hz) 0.06 µV/√Hz 0.06 µV/√Hz [4]
Spectral Noise (1 kHz) 0.06 µV/√Hz 0.06 µV/√Hz [4]
Spectral Noise (10 kHz) 0.05 µV/√Hz 0.05 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) 21 µV/rms 21 µV/rms [4]
Spectral Noise (1 Hz) 5.10 µV/√Hz 5.10 µV/√Hz [4]
Spectral Noise (10 Hz) 0.60 µV/√Hz 0.60 µV/√Hz [4]
Spectral Noise (100 Hz) 0.22 µV/√Hz 0.22 µV/√Hz [4]
Spectral Noise (1 kHz) 0.22 µV/√Hz 0.22 µV/√Hz [4]
Spectral Noise (10 kHz) 0.19 µV/√Hz 0.19 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 165 µV/rms 165 µV/rms [4]
Spectral Noise (1 Hz) 57 µV/√Hz 57 µV/√Hz [4]
Spectral Noise (10 Hz) 5.2 µV/√Hz 5.2 µV/√Hz [4]
Spectral Noise (100 Hz) 1.7 µV/√Hz 1.7 µV/√Hz [4]
Spectral Noise (1 kHz) 1.8 µV/√Hz 1.8 µV/√Hz [4]
Spectral Noise (10 kHz) 1.4 µV/√Hz 1.4 µV/√Hz [4]
Overload Threshold (±1.0 Vpk) ±10/5 Vpk ±10/5 Vpk [1]
Physical
Electrical Connector (ICP® Sensor Input) BNC Jack BNC Jack
Electrical Connector (Output) BNC Jack BNC Jack
Electrical Connector (AC Power Input) IEC 320 IEC 320
Size - Height (nominal ) 1.75 in 44.5 mm
Size - Width (nominal ) 19 in 482.6 mm
Size - Depth (nominal ) 13.7 in 348 mm
Weight 6.25 lb 2.83 kg

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
017AXX 1