1/4 inch pressure mic prepolarized, side vent

Precision Condenser Microphone

Model 377A14

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

1/4 inch Pressure Mic Prepolarized, side vent

  • Nominal Microphone Diameter: 1/4"
  • Frequency Response Characteristic: Pressure
  • Frequency Range: (±2dB)4 to 70000 Hz (4 to 70000 Hz)
  • Inherent Noise: <35 dB(A) re 20 µPa
  • Dynamic Range: (3% Distortion Limit)174 dB re 20 µPa

Specification Notes


[1] Typical.
[2] re 250 Hz
[1] Typical.
[2] re 250 Hz
[1] Typical.
[3] Prepolarized
[1] Typical.
[4] See PCB Declaration of Conformance PS167 for details.

English: SI:
Performance
Nominal Microphone Diameter 1/4" 1/4"
Frequency Response Characteristic Pressure Pressure
Open Circuit Sensitivity (±3 dB) -60 dB re 1 V/Pa -60 dB re 1 V/Pa [2]
Open Circuit Sensitivity 1.0 mV/Pa 1.0 mV/Pa [2]
Frequency Range (±2 dB) 4 to 70000 Hz 4 to 70000 Hz
Lower Limiting Frequency (-3 dB) 0.25 to 3.0 Hz 0.25 to 3 Hz
Resonant Frequency (90° Phase Shift) 65000 Hz 65000 Hz [1]
Inherent Noise <35 dB(A) re 20 µPa <35 dB(A) re 20 µPa
Dynamic Range(3% Distortion Limit) 174 dB re 20 µPa 174 dB re 20 µPa [1]
Environmental
Temperature Range (Operating) -40 to +248 °F -40 to +120 °C
Temperature Coefficient of Sensitivity (+14 to +122°F (-10 to +50°C)) 0.004 dB/°F 0.007 dB/°C [1] [2]
Static Pressure Coefficient -0.003 dB/kPa -0.003 dB/kPa [1] [2]
Humidity Coefficient of Sensitivity (0 to 100%, non-condensing) ±0.0012 dB/%RH ±0.0012 dB/%RH [2]
Influence of Axial Vibration (0.1g (1 m/s²)) 66 dB re 20 µPa 66 dB re 20 µPa [1]
Electrical
Capacitance (Polarized) 5 pF 5 pF [1]
Polarization Voltage 0 V 0 V [3]
Physical
Housing Material Stainless Alloy Stainless Alloy
Venting Side Side
Mounting Thread 0.2244 - 60 UNS 5.7 mm - 60 UNS
Mounting Thread 0.25 - 60 UNS 6.35 mm - 60 UNS
Size - Diameter (with grid) 0.28 in 7.0 mm
Size - Diameter (without grid) 0.25 in 6.4 mm
Size - Height (with grid) 0.41 in 10.5 mm
Size - Height (without grid) 0.36 in 9.1 mm
Weight 0.06 oz 1.8 gm [1]

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
ACS-20 Calibration of precision condenser microphones 1

Product Videos


Build Out Your Measurement Chain


079A07
Model: 079A07

Windscreen (for 1/4-inch microphones)

$40.00 USD

(Pricing valid only in the U.S.)

079A18
Model: 079A18

Clamp-on flexible extension arm

$150.00 USD

(Pricing valid only in the U.S.)

079B10
Model: 079B10

Microphone holder (for 1/4-inch micropho...

$50.00 USD

(Pricing valid only in the U.S.)

079B32
Model: 079B32

1/4 inch array holder (for 1/2 inch diam...

$23.00 USD

(Pricing valid only in the U.S.)

079C20
Model: 079C20

Nose cone (for 1/4 inch microphone)

$350.00 USD

(Pricing valid only in the U.S.)