miniature, lightweight, high g icp accel, 20,000 g pk, integral 3-ft mini low noise coax cable terminating in a 10-32 jack

ICP® Accelerometer

Model 352A92

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
12	Lead Time for 1-5 is 8 Wks. Lead Time for 6-10 is 10 Wks. Lead Time for 11-20 is 12 Wks.
	Lead Time for 11-20 is 12 Wks.

Miniature, Lightweight, High G ICP accel, 20,000 g pk, integral 3-ft mini low noise coax cable terminating in a 10-32 jack

Sensitivity: (±20%)0.25 mV/g (0.025 mV/(m/s²))
Measurement Range: ±20000 g pk (±196200 m/s² pk)
Broadband Resolution: 0.04 g rms (0.39 m/s² rms)
Frequency Range: (±5%)1.2 to 10000 Hz
Sensing Element: Ceramic
Weight: 0.0055 oz (0.16 gm)

Additional configurations:

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Weight measured without cable
[4] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±20 %)	0.25 mV/g	0.025 mV/(m/s²)
Measurement Range	±20000 g pk	±196200 m/s² pk
Frequency Range (±5 %)	1.2 to 10000 Hz	1.2 to 10000 Hz
Frequency Range (±10 %)	1 to 20000 Hz	1 to 20000 Hz
Resonant Frequency	≥100 kHz	≥100 kHz
Broadband Resolution (1)	0.04 g rms	0.39 m/s² rms	[2]
Non-Linearity (10,000 g, 98,100 m/s²)	≤1 %	≤1 %	[1]
Non-Linearity (20000 g, 196,200 m/s²)	≤3 %	≤3 %	[1]
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±30000 g pk	±294300 m/s² pk
Temperature Range (Operating)	-65 to +325 °F	-54 to +163 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[2]
Electrical
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Discharge Time Constant	0.4 to 1.2 sec	0.4 to 1.2 sec
Settling Time (within 10% of bias)	<3 sec	<3 sec
Spectral Noise (1 Hz)	13.5 mg/√Hz	132 mm/s²/√Hz	[2]
Spectral Noise (10 Hz)	3.8 mg/√Hz	37.3 mm/s²/√Hz	[2]
Spectral Noise (100 Hz)	1.2 mg/√Hz	11.7 mm/s²/√Hz	[2]
Spectral Noise (1 kHz)	0.36 mg/√Hz	3.53 mm/s²/√Hz	[2]
Spectral Noise (10 kHz)	0.13 mg/√Hz	1.28 mm/s²/√Hz	[2]
Physical
Size - Height	0.100 in	2.54 mm
Size - Length	0.215 in	5.46 mm
Size - Width	0.135 in	3.43 mm
Weight	0.0055 oz	0.16 gm	[2] [3]
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Epoxy	Epoxy
Electrical Connection Position	Side	Side
Cable Termination	10-32 Coaxial Jack	10-32 Coaxial Jack
Cable Length	3 ft	0.9 m
Cable Type	030 Coaxial	030 Coaxial
Mounting	Adhesive	Adhesive

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
039A37	Removal tool (for Model 352A91 & A92)	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)	1
ACS-159		1