general purpose, ceramic shear icp® accel., 10 mv/g, 0.5 to 9k hz, 10-32 top conn. ground isolated, teds

Accelerometer, ICP®

Model JTLD352C04

  • CE
  • IP

General purpose, ceramic shear ICP® accel., 10 mV/g, 0.5 to 9k Hz, 10-32 top conn. ground isolated, TEDS

  • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4900 m/s² pk)
  • Broadband Resolution: 0.0005 g rms (0.005 m/s² rms)
  • Frequency Range: (±5%)0.5 to 10000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.20 oz (5.8 gm)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] 250° F to 325° F data valid with HT option only.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±500 g pk ±4900 m/s² pk
Frequency Range (±5 %) 0.5 to 10000 Hz 0.5 to 10000 Hz
Frequency Range (±10 %) 0.3 to 15000 Hz 0.3 to 15000 Hz
Resonant Frequency ≥50 kHz ≥50 kHz
Broadband Resolution (1) 0.0005 g rms 0.005 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49000 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2] [3]
Base Strain Sensitivity 0.003 g/µε 0.029 (m/s²)/µε [2]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 7 to 12 VDC 7 to 12 VDC
Discharge Time Constant 1.0 to 2.5 sec 1.0 to 2.5 sec
Settling Time <10 sec <10 sec
Spectral Noise (1 Hz) 110 µg/√Hz 1080 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 25 µg/√Hz 245 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 8 µg/√Hz 78 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 4 µg/√Hz 39 (µm/sec2)/√Hz [2]
Physical
Size - Height 0.88 in 22.4 mm
Size - Hex 0.44 in 11.2 mm
Weight 0.20 oz 5.8 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Top Top
Mounting Thread 10-32 Female 10-32 Female
Mounting Torque 10 to 20 in-lb 113 to 226 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1
080A Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/isolation hardcoat finish 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
M081B05 Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu 1

Optional Versions


(HT) High temperature, extends normal operation temperatures

English SI
Frequency Range 5 to 10000
Frequency Range 3 to 15000
Temperature Range -65 to +325 -54 to +163
Discharge Time Constant 0.1 to 0.3
Spectral Noise 200 1962
Spectral Noise 30 294
Output Bias Voltage 10 to 15
Excitation Voltage 22 to 30 VDC

(J) Ground Isolated

English SI
Electrical Isolation >100000000 Ohm
Size - Height 0.93 in 23.6 mm
Weight 0.21 oz 6.0 gm
Frequency Range 9000 Hz
Frequency Range 14000 Hz
Resonant Frequency 40 kHz
Size - Hex 0.44 in 11.2 mm

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

English SI
Output Bias Voltage 7.5 to 13 VDC
Temperature Range -10 to +250 °F -23 to +121 °C
Excitation Voltage 20 to 30 VDC

(TLA) TEDS LMS International - Free Format

English SI
Output Bias Voltage 7.5 to 13 VDC
Temperature Range -10 to +250 °F -23 to +121 °C
Excitation Voltage 20 to 30 VDC

(TLB) TEDS LMS International - Automotive Format

English SI
Output Bias Voltage 7.5 to 13 VDC
Temperature Range -10 to +250 °F -23 to +121 °C
Excitation Voltage 20 to 30 VDC

(TLC) TEDS LMS International - Aeronautical Format

English SI
Output Bias Voltage 7.5 to 13 VDC
Temperature Range -10 to +250 °F -23 to +121 °C
Excitation Voltage 20 to 30 VDC

(W) Water Resistant Cable

English SI
Electrical Connection Position Top