industrial icp® accel, top exit, 10 meter integral cable, blunt cut, micropower pellet 50 mv/g

INDUSTRIAL 3-WIRE LOW POWER ACCELEROMETER

Model 608M93/M010BZ

Add to Quote
  • CE
  • IP

Industrial ICP® accel, top exit, 10 meter integral cable, blunt cut, MicroPower pellet 50 mV/g

  • Sensitivity: (±20%)50 mV/g (5.1 mV/(m/s²))
  • Frequency Range: (±3dB)60 to 600000 cpm (1 to 10000 Hz)
  • Sensing Element: Ceramic
  • Measurement Range: ±25 g (±245 m/s²)
  • Weight: 3.5 oz (99.3 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] 1/4-28 has no equivalent in S.I. units.
[5] See PCB Declaration of Conformance PS274 for details

English: SI:
Performance
Sensitivity (±20 %) 50 mV/g 5.1 mV/(m/s²) [1]
Measurement Range ±25 g ±245 m/s²
Frequency Range (±3 dB) 60 to 600000 cpm 1 to 10000 Hz
Resonant Frequency 1320 kcpm 22 kHz [3]
Broadband Resolution (1) 550 µg 5,396 µm/sec2 [3]
Non-Linearity ±1 % ±1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [3]
Enclosure Rating IP68 IP68
Electrical
Settling Time (within 10% of bias) 350 µs 350 µs
Discharge Time Constant ≥0.16 ≥0.16
Excitation Voltage 3 to 5 VDC 3 to 5 VDC
Output Impedance <1000 Ohm <1000 Ohm
Current Draw 60 µA 60 µA [3]
Output Bias Voltage (+/-5 %) 1.5 VDC 1.5 VDC
Spectral Noise (10 Hz) 35 µg/√Hz 343 (µm/sec2)/√Hz [3]
Spectral Noise (100 Hz) 12 µg/√Hz 118 (µm/sec2)/√Hz [3]
Spectral Noise (1 kHz) 6 µg/√Hz 59 (µm/sec2)/√Hz [3]
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 9/16 in 14 mm
Size - Height 2.5 in 64 mm
Weight (with cable) 3.5 oz 99.3 gm
Mounting Stud Stud
Mounting Thread 1/4-28 Female 1/4-28 Female [4]
Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material 316L Stainless Steel 316L Stainless Steel
Sealing Molded Molded
Electrical Connector Molded Integral Cable Molded Integral Cable
Electrical Connection Position Top Top
Electrical Connections (Red) Pos (+) Power Pos (+) Power
Electrical Connections (Black) Ground Ground
Electrical Connections (White) Acceleration Output Acceleration Output
Cable Length 33 ft 10 m
Cable Type Polyurethane Polyurethane

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1

Optional Versions

(EX) Hazardous Area Approval- contact factory for specific approvals

English SI
Hazardous Area Approval EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4