8-channel, line-powered, icp® sensor signal cond., x0.1 to x200 gain, teds, ethernet

ICP® Sensor Signal Conditioner

Model 483C50

  • CE
  • IP

8-channel, line-powered, ICP® sensor signal cond., x0.1 to x200 gain, TEDS, Ethernet

  • Sensor Input Type(s): ICP®, Voltage
  • Channels: 8
  • Voltage Gain: x0.1 to x200
  • TEDS Sensor Support: Yes
  • Power Required: AC Power

Specification Notes


[1] Typical.
[2] User adjustable, factory set at 4 mA (± 0.5 mA).
[3] See PCB Declaration of Conformance PS024 for details.

English: SI:
Performance
Channels 8 8
Sensor Input Type(s) ICP®, Voltage ICP®, Voltage
Voltage Gain x0.1 to x200 x0.1 to x200
Voltage Gain Increment 0.1 0.1
Accuracy (Gain, x0.1 to x0.4) ±5 % ±5 %
Accuracy (Gain, x0.5 to x200) ±1 % ±1 %
Low Frequency Response (-5 %) ≤0.05 Hz ≤0.05 Hz
High Frequency Response (-3 dB) >100 kHz >100 kHz
High Frequency Response (-3 dB) >80 kHz >80 kHz
Phase Response (at 1 kHz) ±2 ° ±2 °
Non-Linearity 1 % 1 %
Cross Talk <72 dB <72 dB
TEDS Sensor Support Yes Yes
Fault/Bias Monitor/Meter (LED) Open/Short/Overload Open/Short/Overload
Control Interface
Digital Control Interface Ethernet Ethernet
Environmental
Temperature Range (Operating) +32 to +120 °F 0 to +50 °C
Electrical
Power Required (direct input to unit) AC Power AC Power
AC Power (47 to 63 Hz) 100 to 240 VAC 100 to 240 VAC
AC Power ≤0.7 Amps ≤0.7 Amps
Excitation Voltage (To Sensor) >24 VDC >24 VDC
DC Offset <50 mV <50 mV
Constant Current Excitation (To Sensor ) (Non-Isolated Mode) 2 to 20 mA 2 to 20 mA [2]
Output Impedance <50 Ohm <50 Ohm
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 50.0 µV/rms 50.0 µV/rms [1]
Spectral Noise (1 Hz) 8.0 µV/√Hz 8.0 µV/√Hz [1]
Spectral Noise (10 Hz) 1.5 µV/√Hz 1.5 µV/√Hz [1]
Spectral Noise (100 Hz) 1.0 µV/√Hz 1.0 µV/√Hz [1]
Spectral Noise (1 kHz) 1.0 µV/√Hz 1.0 µV/√Hz [1]
Spectral Noise (10 kHz) 1.0 µV/√Hz 1.0 µV/√Hz [1]
Broadband Electrical Noise (1 to 10000 kHz) (Gain x10) 75.0 µV rms 75.0 µV rms [1]
Spectral Noise (1 Hz) 20.0 µV/√Hz 20.0 µV/√Hz [1]
Spectral Noise (10 Hz) 1.5 µV/√Hz 1.5 µV/√Hz [1]
Spectral Noise (100 Hz) 1.0 µV/√Hz 1.0 µV/√Hz [1]
Spectral Noise (1 kHz) 1.0 µV/√Hz 1.0 µV/√Hz [1]
Spectral Noise (10 kHz) 1.0 µV/√Hz 1.0 µV/√Hz [1]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 350 µV rms 350 µV rms [1]
Spectral Noise (1 Hz) 100.0 µV/√Hz 100.0 µV/√Hz [1]
Spectral Noise (10 Hz) 10.0 µV/√Hz 10.0 µV/√Hz [1]
Spectral Noise (100 Hz) 8.0 µV/√Hz 8.0 µV/√Hz [1]
Spectral Noise (1 kHz) 6.0 µV/√Hz 6.0 µV/√Hz [1]
Spectral Noise (10 kHz) 6.0 µV/√Hz 6.0 µV/√Hz [1]
Overload Threshold (±0.5 Vpk) ±10 Vpk ±10 Vpk
Physical
Electrical Connector (ICP® Sensor Input) BNC Jack BNC Jack
Electrical Connector (Output) BNC Jack BNC Jack
Electrical Connector (Ethernet) RJ-45 RJ-45
Size - Height (nominal ) 1.75 in 44.5 mm
Size - Width (nominal ) 19 in 482.6 mm
Size - Depth (nominal ) 13.7 in 348 mm
Weight 7 lb 3.18 kg

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
017AXX 1
EE75 1

Product Downloads


PCB_MCSC Software, EE75_Installer.zip

Software for signal conditioners - RS232 & Ethernet

Lantronix Installer

Ethernet Address Tool