torque sensor, rotary transformer, 3600 in-lb fs, flanges & splines per and 10262 & and 20002

Rotary Transformer Torque Sensor

Model 4115K-10A

Add to Quote
  • CE
  • IP

Torque sensor, rotary transformer, 3600 in-lb FS, flanges & splines per AND 10262 & AND 20002

Speed sensor sold separately.


Cable: 8310-06-xxA and 8310-03-xxA

  • Measurement Range: 3600 in-lb (405 Nm)
  • Sensitivity: (±15%)2.5 mV/V (2.5 mV/V)
  • Non-Linearity: <=0.05 % FS
  • Mounting: Splined
  • Maximum Speed: 15000 RPM

Specification Notes

[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[2] FS - Full Scale.
[4] Recommended 10 VAC RMS.
[5] See PCB Declaration of Conformance PS062 for details.

English: SI:
Performance
Measurement Range (Full Scale Capacity) 3600 in-lb 405 Nm [1]
Sensitivity (±15 %) (output at rated capacity) 2.5 mV/V 2.5 mV/V [1] [2]
Non-Linearity ≤0.05 % FS ≤0.05 % FS [2]
Hysteresis ≤0.05 % FS ≤0.05 % FS [2]
Non-Repeatability ≤0.03 % FS ≤0.03 % FS [2]
Environmental
Overload Limit 10800 in-lb 1220 Nm
Temperature Range (Operating) -65 to 225 °F -54 to 107 °C
Temperature Range (Compensated) +70 to +170 °F +21 to 77 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0036 %Reading/°C [3]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0036 %FS/°C [2] [3]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Frequency 3.28 kHz 3.28 kHz
Excitation Voltage 2 to 10 VAC rms 2 to 10 VAC rms [4]
Bridge Current (at 5 VAC) 50 mA 50 mA
Insulation Resistance >5000000 kohm >5000000 kohm
Zero Balance ≤2 % FS ≤2 % FS [2]
Physical
Size - Shaft Length 9.56 in 242.82 mm
Size - Housing Length 8.25 in 209.55 mm
Size - Housing Height 6.00 in 152.40 mm
Weight 47 lb 21.3 kg
Mounting Splined Splined
Sensing Element Strain Gage Strain Gage
Housing Material Black Oxided Steel Black Oxided Steel
Shaft Material Steel Steel
Electrical Connector MS3102A-14S-5P MS3102A-14S-5P
Electrical Connection Position Side Side
Torsional Stiffness 420000 in-lb/radian 47500 N-m/radian
Rotating Inertia 0.0058 in-lb sec2 0.0007 N-m sec2
Maximum Speed 15000 RPM 15000 RPM

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
180-019A Mating conn., 5-socket (F) (for Series 3100, 4100 & 4200) 1
8113-105A Relay activated precision shunt calibration module 1

Build Out Your Measurement Chain