differential vc mems accelerometer, 27 mv/g, 100 g, 10 ft integral cable, pigtail termination.

DC Response Accelerometer

Model 3741F12100G

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-5 is 6 Wks. Lead Time for 6-10 is 8 Wks.

Differential VC MEMS accelerometer, 27 mV/g, 100 g, 10 ft integral cable, pigtail termination.

Sensitivity: (±3%)27 mV/g (2.75 mV/(m/s²))
Measurement Range: ±100 g pk (±980.7 m/s² pk)
Broadband Resolution: 3 mg rms (0.03 m/s² rms)
Temperature Range: -65 to 250 °F (-54.0 to 121 °C)
Frequency Range: (±5%)0 to 1500 Hz
Electrical Connector: Integral Cable

Additional configurations:

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Measured at 100 Hz, 10 grms.
[2] Typical.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] FSO = Full Scale Output over the Measurement Range (8VDC).
[2] Typical.
[6] Offset tolerance is based on manufacturers supplied cable length.
[7] Case and shield to mounting surface or cable leads.
[2] Typical.
[8] See PCB Declaration of Conformance PS027 for details.

	English:	SI:
Performance
Sensitivity (±3 %)	27 mV/g	2.75 mV/(m/s²)	[3]
Measurement Range	±100 g pk	±980.7 m/s² pk
Frequency Range (±5 %)	0 to 1500 Hz	0 to 1500 Hz
Frequency Range (±10 )	0 to 2500 Hz	0 to 2500 Hz
Resonant Frequency	8.5 kHz	8.5 kHz	[2]
Phase Response (100 Hz)	<10 °	<10 °
Non-Linearity (Typical)	0.3 %	0.3 %	[1]
Non-Linearity (Max)	1 %	1 %	[1]
Broadband Resolution (0.5)	3 mg rms	0.03 m/s² rms	[2]
Transverse Sensitivity (Typical)	1 %	1 %
Transverse Sensitivity (Max)	3 %	3 %
Environmental
Overload Limit (Shock)	±5000 g pk	±49050 m/s² pk
Temperature Range (Operating)	-65 to 250 °F	-54.0 to 121 °C
Temperature Range (Storage)	-65 to 250 °F	-54.0 to 121 °C
Temperature Coefficient of Sensitivity	±2.5 %	±2.5 %
Temperature Coefficient of Sensitivity	±1 %	±1 %	[2] [4]
Zero g Offset Temperature Coefficient	±1 % FSO	±1 % FSO	[2] [4] [5]
Base Strain Sensitivity	0.001 g/µε	.01 (m/s²)/µε	[2]
Magnetic Sensitivity	40 µg/gauss	3.9 (m/s²)/Tesla	[2]
Electrical
Excitation Voltage	5 to 32 VDC	5 to 32 VDC
Current Consumption	≤5 mA	≤5 mA
Output Impedance	≤120 Ohm	≤120 Ohm
Offset Voltage	±20 mVDC	±20 mVDC	[6]
Common Mode Voltage (±0.1 VDC)	+1.65 VDC	+1.65 VDC
Spectral Noise (1 Hz)	300 µg/√Hz	2,943 (µm/s²)/√Hz	[2]
Spectral Noise (10 Hz)	300 µg/√Hz	2,943 (µm/s²)/√Hz	[2]
Spectral Noise (100 Hz)	300 µg/√Hz	2,943 (µm/s²)/√Hz	[2]
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm	[7]
Physical
Housing Material	Anodized Aluminum	Anodized Aluminum
Sealing	Epoxy	Epoxy
Size - Height	0.30 in	7.62 mm
Size - Length	1.00 in	25.4 mm
Size - Width	.85 in	21.6 mm
Weight (without cable)	0.35 oz	9.92 gm	[2]
Electrical Connector	Integral Cable	Integral Cable
Electrical Connection Position	Side	Side
Cable Termination	Pigtail Ends	Pigtail Ends
Cable Type	010 4-cond Shielded	010 4-cond Shielded
Cable Length	10 ft	3 m
Mounting	Through Holes (2)	Through Holes (2)

* All specifications are at room temperature unless otherwise specified.

Accessories


Optional
080A208	Triaxial mounting block, aluminum, for use with 3741 Series	1
Supplied
ACS-172		1
081A103	4-40 threaded black-oxide alloy steel socket head cap screw with stainless steel washer (for series (for series 3741, 354x04/05)	2
M081A103	M3x0.5 mm threaded black-oxide alloy steel socket head cap screw, 10 mm long with stainless steel washer (for 354x04/05)	2