miniature ring-style, ceramic shear icp® accel., 10 mv/g, 1 to 9k hz, integral cable, case isolated

ICP® Accelerometer

Model 355A44

Add to Quote
  • CE
  • IP

Miniature ring-style, ceramic shear ICP® accel., 10 mV/g, 1 to 9k Hz, integral cable, case isolated

 
  • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)
  • Broadband Resolution: 0.001 g rms (0.01 m/s² rms)
  • Frequency Range: (±5%)1 to 5500 Hz
  • Sensing Element: Ceramic
  • Weight: .13 oz (3.6 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±500 g pk ±4905 m/s² pk
Frequency Range (±5 %) 1 to 5500 Hz 1 to 5500 Hz
Frequency Range (±10 %) 0.8 to 15000 Hz 0.8 to 15000 Hz
Frequency Range (±3 dB) .5 to 22000 Hz .5 to 22000 Hz
Resonant Frequency ≥45 kHz ≥45 kHz
Broadband Resolution (500) 0.001 g rms 0.01 m/s² rms [2]
Non-Linearity 1 % 1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit ±5000 g pk ±49050 m/s² pk
Temperature Range -65 to +250 °F -54 to +121 °C
Temperature Response See Graph See Graph
Base Strain Sensitivity ≤0.08 g/µε ≤0.8 (m/s²)/µε [2]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤300 Ohm ≤300 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.4 to 1.5 sec 0.4 to 1.5 sec
Settling Time (within 10% of bias) ≤15 sec ≤15 sec
Spectral Noise (10 Hz) 10 µg/√Hz 98 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 5 µg/√Hz 47 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 5 µg/√Hz 47 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 5 µg/√Hz 47 (µm/sec2)/√Hz [2]
Electrical Isolation (Case) ≥100000000 Ohm ≥100000000 Ohm
Physical
Size - Height .32 in 8.1
Size - Length 0.94 in 23.8 mm
Size - Width 0.46 in 11.7 mm
Weight (without cable) .13 oz 3.6 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Electrical Connector Sealed Integral Cable Sealed Integral Cable
Electrical Connection Position Side Side
Cable Termination Pigtail Ends Pigtail Ends
Cable Length 20.0 ft 6.1 m
Cable Type 2-cond Shld, 26 AWG, XLETFE Jacket 2-cond Shld, 26 AWG, XLETFE Jacket
Mounting Through Hole Through Hole
Mounting Torque 1 to 2 in-lb 11 to 23 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
100-8002-20 1
37642-01 1
ACS-166 1