high amplitude, triaxial icp® accel., 0.5 mv/g, 10k g range, w/built-in 2nd order low-pass filter (-3db at 20 khz), no mating cable supplied

TRIAXIAL ICP® ACCELEROMETER

Model 350B50/NC

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-5 is 8 Wks.
Lead Time for 6-10 is 10 Wks.
  • CE
  • IP

High amplitude, triaxial ICP® accel., 0.5 mV/g, 10k g range, w/built-in 2nd order low-pass filter (-3dB at 20 kHz), no mating cable supplied

  • Sensitivity: (±30%)0.5 mV/g (0.05 mV/(m/s²))
  • Measurement Range: ±10000 g pk (±98000 m/s² pk)
  • Electrical Connector: Integral Cable

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Electrical filter is a second order filter.
[2] Typical.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±30 %) 0.5 mV/g 0.05 mV/(m/s²)
Measurement Range ±10000 g pk ±98000 m/s² pk
Frequency Range (±1 dB) 3 to 10000 Hz 3 to 10000 Hz
Frequency Range (-3 dB) 1.5 to 20000 Hz 1.5 to 20000 Hz [3]
Resonant Frequency ≥60 kHz ≥60 kHz
Broadband Resolution (1) 0.03 g rms 0.29 m/s² rms [2]
Non-Linearity (per 1000 g (9810 m/s2)) ≤2 % ≤2 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±25000 g pk ±245000 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant 0.5 to 1.0 sec 0.5 to 1.0 sec
Settling Time (within 10% of bias) <5 sec <5 sec
Electrical Isolation (Base) >100000000 Ohm >100000000 Ohm
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.32 in 8.2 mm
Size - Length 0.72 in 18.3 mm
Size - Width 0.72 in 18.3 mm
Weight (without cable) 0.3 oz 8.0 gm [2]
Electrical Connector Integral Cable Integral Cable
Electrical Connection Position Side Side
Cable Termination 1/4-28 4-Pin Jack 1/4-28 4-Pin Jack
Cable Length 5.0 ft 1.52 m
Cable Type 034 4-cond Shielded 034 4-cond Shielded
Mounting Through Hole Through Hole

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
034G05 4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) 1
080B197 Mounting Adaptor, through hole for 350B50 1
ACS-14T 1
ACS-22T Triaxial amplitude response calibration for shock accelerometer, 100 Hz to upper 1 dB frequency (max 15 kHz) 1
081A112 Socket head cap screw assembly, 6-32 thread with off ground washer and tube 4

Build Out Your Measurement Chain