icp® quartz force ring, 60k lb comp., 0.08 mv/lb

Force Sensor, ICP®

Model 205C

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-5 is 10 Wks.

ICP® quartz force ring, 60k lb comp., 0.08 mV/lb

Measurement Range: 60000 lb (266.9 kN)
Sensitivity: (±15%)0.08 mV/lb (18.0 mV/kN)
Low Frequency Response: 0.0003 Hz
Upper Frequency Limit: 50000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	0.08 mV/lb	18.0 mV/kN
Measurement Range (Compression)	60000 lb	266.9 kN
Maximum Static Force (Compression)	70000 lb	311.4 kN
Broadband Resolution (1)	1 lb-rms	4.45 N-rms	[2]
Low Frequency Response	0.0003 Hz	0.0003 Hz	[3]
Upper Frequency Limit	50000 Hz	50000 Hz	[4]
Non-Linearity	≤1.5 % FS	≤1.5 % FS	[1]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.10 %/°F	≤0.18 %/°C
Electrical
Discharge Time Constant (at room temp)	≥2000 sec	≥2000 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Spectral Noise (1 Hz)	0.0981 lb/√Hz	0.44 N/√Hz	[2]
Spectral Noise (10 Hz)	0.0306 lb/√Hz	0.14 N√Hz	[2]
Spectral Noise (100 Hz)	0.00709 lb/√Hz	0.032 N/√Hz	[2]
Spectral Noise (1000 Hz)	0.00192 lb/√Hz	0.00857 N/√Hz	[2]
Output Polarity (Compression)	Positive	Positive
Physical
Preload	12000 lb	53.379 kN
Stiffness	40 lb/µin	7 kN/µm	[2]
Size - Diameter	1.580 in	40.13 mm
Size - Height	0.510 in	12.95 mm
Size - Bolt Diameter	.75 in	20 mm
Size - ID (Hole Diameter)	0.830 in	21.08 mm
Size - OD (Sensor)	1.580 in	40.13 mm
Size - Sensing Surface	1.375 in	34.93 mm
Weight	2.7 oz	77 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A82	Assembly lubricant (for Series 201-207 force rings)	1
081A15	Mounting stud, 5/8-18 x 1.650", BeCu for Models 205C & 215B	1
082B05	Anti-friction washer for Models (M)205C & (M)215B	1
083B05	Pilot bushing for Models 205C & 215B	1