ICP® Force Sensor

Model 201B76

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
53	Lead Time for 1-5 is 14 Dys. Lead Time for 6-15 is 3 Wks. Lead Time for 16-25 is 5 Wks.
	Lead Time for 16-25 is 5 Wks.

Low profile, ICP® quartz force ring, 5k lb comp., 1 mV/lb, 5-44 connector

Measurement Range: 5000 lb (22.24 kN)
Sensitivity: (±15%)1 mV/lb (224.8 mV/kN)
Low Frequency Response: (-5%)0.0003 Hz
Upper Frequency Limit: 90000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	1 mV/lb	224.8 mV/kN
Measurement Range (Compression)	5000 lb	22.24 kN
Maximum Static Force (Compression)	5000 lb	22.24 kN
Broadband Resolution (1)	0.10 lb-rms	0.445 N-rms	[2]
Low Frequency Response (-5 %)	0.0003 Hz	0.0003 Hz	[3]
Upper Frequency Limit	90000 Hz	90000 Hz	[4]
Non-Linearity	≤1 % FS	≤1 % FS	[1]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.03 %/°F	≤0.054 %/°C
Electrical
Discharge Time Constant	≥2000 sec	≥2000 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Spectral Noise (1 Hz)	0.00307 lb/√Hz	0.0137 N/√Hz	[2]
Spectral Noise (10 Hz)	0.00115 lb/√Hz	0.00513 N√Hz	[2]
Spectral Noise (100 Hz)	0.000402 lb/√Hz	0.00179 N/√Hz	[2]
Spectral Noise (1000 Hz)	0.000114 lb/√Hz	0.000509 N/√Hz	[2]
Output Polarity (Compression)	Positive	Positive
Physical
Preload	1000 lb	4.448 kN
Stiffness	16 lb/µin	2.8 kN/µm	[2]
Weight	0.25 oz	7 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector	5-44 Coaxial Jack	5-44 Coaxial Jack
Electrical Connection Position	Side	Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A11	Mounting stud, 10-32 x 0.730", BeCu for Models 201B01, 201B02, 201B03, 201B04, 201B05, 211B & 201B76	1
083A15	Pilot bushing (10-32) for Models 201B76	1