differential charge output pressure sensor with uht-12™ element, 15.0 pc/psi + 1200f atex-csa approved

Charge Output Pressure Sensor

Model 176M56

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Differential charge output pressure sensor with UHT-12™ element, 15.0 pC/psi + 1200F ATEX-CSA approved

  • Measurement Range: 10 psi (.69 bar)
  • Sensing Element: UHT-12™
  • Temperature Range: -94 to 1200 °F (-70 to 650 °C)
  • Electrical Connector: 7/16-27 2-Pin (7/16-27 2-Pin)
  • Weight: 11.9 oz (337 gm)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Maximum.
[2] Typical.
[4] See PCB Declaration of Conformance PS058 for details.

English: SI:
Performance
Sensitivity (+/-20 %) 15 pC/psi 2.18 pC/kPa
Sensitivity (+/-20 %) 15 pC/psi 217.5 pC/bar
Measurement Range 10 psi .69 bar
Maximum Pressure (Total) 2000 psi 137.9 bar
Resonant Frequency ≥50 kHz ≥50 kHz
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Acceleration Sensitivity 0.01 psi/g .00069 bar/g [3]
Acceleration Sensitivity .003 psi/g .00021 bar/g [2]
Temperature Range (Continuous) -94 to 1200 °F -70 to 650 °C
Temperature Range (Receptacle) -76 to 500 °F -60 to 260 °C
Temperature Response See Graph See Graph [2]
Hazardous Area Approval See Manual See Manual
Electrical
Output Polarity Differential Differential
Capacitance 113 pF 113 pF [2]
Resistance(Pin-Pin) (Room Temp) ≥1000000000000 Ohm ≥1000000000000 Ohm
Resistance(Pin-Case) (Room Temp) ≥1000000000000 Ohm ≥1000000000000 Ohm
Resistance(Pin-Pin) (1200°F/650°C) ≥50 kohm ≥50 kohm
Resistance(Pin-Case) (1200°F/650°C) ≥100 kohm ≥100 kohm
Physical
Sensing Element UHT-12™ UHT-12™
Sensing Geometry Compression Compression
Housing Material Nickel Alloy Nickel Alloy
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 7/16-27 2-Pin 7/16-27 2-Pin
Cable Type Overbraided Hardline Overbraided Hardline
Weight (with clamp nut & cable) 11.9 oz 337 gm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
PCS-1 Calibration of dynamic pressure sensors at 20% intervals to full scale, max 15 kpsi range. 0
060M61 Clamp nut with front portion 0.745" OD 1
40890-01 6