icp® acoustic pressure sensor, 300 mv/psi, resolution 0.0001 psi (+91 db), accel. comp.

ICP® Pressure Sensor

Model 106B

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-5 is 10 Wks.
  • CE
  • IP

ICP® Acoustic Pressure Sensor, 300 mV/psi, resolution 0.0001 psi (+91 dB), accel. comp.

  • Measurement Range: 8.0 psi (55.1 kPa)
  • Sensitivity: (±15%)300 mV/psi (43.5 mV/kPa)
  • Low Frequency Response: (-5%)0.5 Hz
  • Resonant Frequency: >=60 kHz (>=60 kHz)
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 0.63 oz (18.0 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Used with optional mounting adaptor.
[4] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Measurement Range 8.0 psi 55.1 kPa
Sensitivity (±15 %) 300 mV/psi 43.5 mV/kPa
Maximum Pressure (step) 200 psi 1379 kPa
Maximum Pressure 2000 psi 13790 kPa [2]
Resolution 0.0001 psi 0.00069 kPa [2]
Resonant Frequency ≥60 kHz ≥60 kHz
Rise Time ≤9 µ sec ≤9 µ sec
Low Frequency Response (-5 %) 0.5 Hz 0.5 Hz
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Acceleration Sensitivity 0.002 psi/g 0.0014 kPa/(m/s²) [2]
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Coefficient of Sensitivity ≤0.05 %/°F ≤0.09 %/°C
Maximum Flash Temperature 3000 °F 1649 °C
Maximum Vibration 1000 g pk 9800 m/s² pk
Maximum Shock 2000 g pk 19600 m/s² pk
Electrical
Output Polarity (Positive Pressure) Positive Positive
Discharge Time Constant (at room temp) ≥1 sec ≥1 sec
Excitation Voltage 12 to 30 VDC 12 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 3 to 8 VDC 3 to 8 VDC
Physical
Sensing Geometry Compression Compression
Sensing Element Quartz Quartz
Housing Material 304/304L Stainless Steel 304/304L Stainless Steel
Diaphragm 316L Stainless Steel 316L Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.63 oz 18.0 gm

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
PCS-1 Calibration of dynamic pressure sensors at 20% intervals to full scale, max 15 kpsi range. 0
PCS-17 0
PCS-24 0
060A12 Clamp nut, 9/16-18-2A thd, 9/16" hex (for Models 106B & 116B) 1
060A14 Metric clamp nut, M14 x 1.25-6G thd, 14 mm hex, SS (for Models M106B & M116B) 1
065A37 Seal ring, 0.497" OD x 0.437" ID x 0.025" thick, brass (for Model 106B) 3

Optional Versions

(E) Emralon coating

English SI
Electrical Isolation 100000000 Ohm
Coating Emralon

(J) Ground Isolated

English SI
Electrical Isolation 100000000 Ohm
Electrical Isolation 100000000 Ohm

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

English SI
Output Bias Voltage 3.7 to 8.7 VDC
Output Bias Voltage 3.7 to 8.7 VDC
(W) Water Resistant Cable
Accessories:
Supplied 060A12 Clamp nut, 9/16-18-2A thd, 9/16" hex 1
(WM) Water Resistant Cable
Accessories:
Supplied 060A14 Metric clamp nut, M14 x 1.25-6g thd, 14 mm hex, stainless steel 1

Build Out Your Measurement Chain