pcb l&t fastener force washer, metric, m18, 180 kn (40.5 klbf), 5-ft integral cable w/pigtails

LOAD WASHER LOAD CELL - M18 FASTENER

Model 054218-01184

Add to Quote
  • IP

PCB L&T Fastener Force Washer, Metric, M18, 180 kN (40.5 klbf), 5-ft Integral Cable w/pigtails

For more information on RS Technologies Fastener Testing products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology/fastener-testing

To view the RS Technologies Fastener Testing Product Catalog, please visit:
https://www.pcb.com/Contentstore/MktgContent/LinkedDocuments/Force-Torque/RS_Fast_Testing_Lowres.pdf
  • Measurement Range: 40465 lb (180 kN)
  • Sensitivity: 1.50 mV/V
  • Size - Diameter: 1.62 in (41.15 mm)
  • Size - Height: 0.595 in (15.11 mm)

Specification Notes

[1] Nominal.
[2] FS - Full Scale.
[3] Over compensated operating temperature range.
[1] Nominal.
[4] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[5] See Outline Drawing (LT30776) for Complete Dimensions

English: SI:
Performance
Measurement Range (Full Scale Capacity) 40465 lb 180 kN [1]
Sensitivity (output at rated capacity) 1.50 mV/V 1.50 mV/V [1] [2]
Non-Linearity ±5 % FS ±5 % FS [2]
Hysteresis ±5 % FS ±5 % FS [2]
Non-Repeatability ±2 % FS ±2 % FS [2]
Resonant Frequency 10 kHz 10 kHz
Environmental
Overload Limit 60698 lb 270 kN
Temperature Range (Operating) 0 to +200 °F -18 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0018 %Reading/°C [3]
Temperature Effect on Zero Balance (Maximum) ±0.002 %FS/°F ±0.0018 %FS/°C [2]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Voltage (Recommended) 10 VDC 10 VDC [4]
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity (Compression) Positive Positive
Isolation Resistance ≥1G Ohm ≥1G Ohm
Physical
Size - Height 0.595 in 15.11 mm [5]
Size - Diameter 1.62 in 41.15 mm
Fastener Size NO EQUIV 18 mm
Through Hole Diameter 0.715 in 18.16 mm
Sensing Element Strain Gage Strain Gage
Electrical Connector Pigtail Ends Pigtail Ends
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories
Optional
080922-01000 Model 922 Portable Digital Peak Meter for measuring torque, torque and angle, or load measurement. Click-wrench calc feature and multi-limit sets. Complete with battery charger, data transfer software, and instruction manual 0
080962-01000 Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case 0
Supplied
7122R-007502 1
92160-032558 1
92160-032559 1

Build Out Your Measurement Chain