rotary torque angle transducer, w/auto-id, 15 nm (132 in-lb), 1/4-inch square drive, 10-pin pt receptacle

ROTARY TORQUE, W/ENCODER AND AUTO ID

Model 039225-51015/B

Rotary Torque Angle Transducer, w/Auto-ID, 15 Nm (132 in-lb), 1/4-inch Square Drive, 10-pin PT Receptacle

For more information on RS Technologies Fastener products and applications, please visit:
https://www.pcb.com/sensors-for-test-measurement/fastener-technology
and click the link for Fastener Testing or Fastener Assembly

Measurement Range: 132 lbf-in (15 Nm)
Sensitivity: 2.0 mV/V (2.0 mV/V)
Non-Linearity: <=0.25 % FS
Maximum Speed: 5000 RPM

Specification Notes

[1] FS - Full Scale.
[2] Matched for mV/V and shunt calibration.
[3] Matched to ±0.25% F.S.
[4] Over compensated temperature range.
[1] FS - Full Scale.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] A-B Track 90° Phase Difference, Flat Over Operating Speed
[7] Magnetic Encoder Specifications.
[8] Matched with 43.575 kOhm Precision Resistor.
[9] Per ANSI B107.4 Specifications
[10] See Outline Drawing 45187 for Complete Dimensions
[11] See PCB Declaration of Conformance PS119 for details.

	English:	SI:
Performance
Measurement Range (Full Scale Capacity)	132 lbf-in	15 Nm
Sensitivity (output at rated capacity)	2.0 mV/V	2.0 mV/V	[3]
Non-Linearity	≤0.25 % FS	≤0.25 % FS	[1]
Hysteresis	≤0.25 % FS	≤0.25 % FS	[1]
Non-Repeatability	≤0.05 % FS	≤0.05 % FS	[1]
Interchangeabilty	≤0.30 % FS	≤0.30 % FS	[1] [2]
Environmental
Overload Limit	203 lbf-in	23 Nm
Temperature Range (Operating)	0 to +200 °F	-18 to +93 °C
Temperature Range (Compensated)	+70 to +150 °F	+21 to +66 °C
Temperature Effect on Output (Maximum)	±0.002 %Reading/°F	±0.0018 %Reading/°C	[4]
Temperature Effect on Zero Balance (Maximum)	±0.002 %FS/°F	±0.0018 %FS/°C	[4]
Electrical
Bridge Resistance	350 Ohm	350 Ohm
Excitation Voltage	10 VDC	10 VDC	[5]
Insulation Resistance	≥5 GOhm	≥5 GOhm
Zero Balance	≤2 % FS	≤2 % FS	[1]
Counts Per Revolution	1472	1472	[7]
Resolution w/ Quadrature	1/4 °	1/4 °	[7]
Output Voltage	High 5V to Low 0.5V	High 5V to Low 0.5V	[7]
Power Required (maximum)	5 VDC @ 120mA	5 VDC @ 120mA	[7]
Magnetic Encoder (Poles)	360	360	[7]
Magnetic Encoder (Ouput)	See Note	See Note	[6] [7]
Shunt Calibration	≤0.25 % FS	≤0.25 % FS	[1] [8]
Auto ID	TTL Proprietary	TTL Proprietary
Physical
Size - Shaft Length	3.23 in	82.0 mm	[10]
Size - Housing Length	2.30 in	58.4 mm	[10]
Size - Housing Height	2.00 in	50.8 mm	[10]
Weight	.75 lb	340 gm
Mounting	1/4 inch Sq Drive	6.35 mm Sq Drive	[9]
Sensing Element	Strain Gage	Strain Gage
Housing Material	Aluminum	Aluminum
Shaft Material	Steel	Steel
Electrical Connector	PT02H-12-10P	PT02H-12-10P
Maximum Speed	5000 RPM	5000 RPM

* All specifications are at room temperature unless otherwise specified.

Accessories


Optional
080920-01000	Model 920 Portable Digital Peak Meter for torque, torque-angle or load measurement; Click-Wrench calc feature, w/battery charger, instruction manual & shoulder strap	1
080962-01000	Model 962 Portable Transient Recorder, complete with FastPlot2 data transfer software, 8GB USB Memory Drive, USB cable for data upload/download, battery charger, and carrying case	1
097000-34445	Cable, Coiled, 3-ft, RS Instrument to 10-pin Transducers	1
4242R-000630		1
Supplied
7122R-04352A	Precision Cal Resistor 43.575K Ohm	1