triaxial, mini (5 gm) high sensitivity, icp® accel., 100 mv/g, 1 hz to 4k hz, titanium hsg, mini 4-pin conn, teds 1.0

Accelerometer, ICP®, Triaxial

Model TLD356A32/NC

Add to Quote
  • CE
  • IP

Triaxial, mini (5 gm) high sensitivity, ICP® accel., 100 mV/g, 1 Hz to 4k Hz, titanium hsg, mini 4-pin conn, TEDS 1.0

  • Sensitivity: (±10%)100 mV/g (10.2 mV/(m/s²))
  • Measurement Range: ±50 g pk (±491 m/s² pk)
  • Electrical Connector: 8-36 4-Pin

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 100 mV/g 10.2 mV/(m/s²)
Measurement Range ±50 g pk ±491 m/s² pk
Frequency Range (±5 %) 1.0 to 4000 Hz 1.0 to 4000 Hz
Frequency Range (±10 %) 0.7 to 5000 Hz 0.7 to 5000 Hz
Resonant Frequency ≥25 kHz ≥25 kHz
Broadband Resolution (1) 0.0003 g rms 0.003 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [2]
Electrical
Excitation Voltage 24 to 30 VDC 24 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 7 to 16 VDC 7 to 16 VDC
Discharge Time Constant 0.4 to 1.5 sec 0.4 to 1.5 sec
Settling Time (within 10% of bias) <5 sec <5 sec
Spectral Noise (1 Hz) 95 µg/√Hz 932 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 20 µg/√Hz 196 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 6 µg/√Hz 58.9 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 3 µg/√Hz 29.4 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 2 µg/√Hz 19.6 (µm/sec2)/√Hz [2]
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.45 in 11.4 mm
Size - Length 0.45 in 11.4 mm
Size - Width 0.45 in 11.4 mm
Weight 0.19 oz 5.4 gm [2]
Electrical Connector 8-36 4-Pin 8-36 4-Pin
Electrical Connection Position Side Side
Mounting Thread 5-40 Female 5-40 Female
Mounting Torque 4 to 5 in-lb 45 to 55 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
034K10 4-conductor, low noise, shielded FEP cable, 10-ft, mini 4-socket plug to (3) BNC plugs (labeled X, Y, Z) 1
080A Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/isolation hardcoat finish 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
081A27 Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu 1
081A90 Mounting stud, 10-32 to 5-40 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081A27 Metric mtg stud, 5-40 to M3 x 0.50 long 1

Optional Versions

(TLC) TEDS LMS International - Aeronautical Format

English SI
Output Bias Voltage 7.7 to 17.0 VDC
Weight .23 oz 6.4 gm
Mounting Adhesive

(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

English SI
Output Bias Voltage 7.7 to 17.0
Weight .23 6.4
Mounting Adhesive

Build Out Your Measurement Chain