modally tuned® impulse hammer w/force sensor and tips, 0 to 100 lbf, 50 mv/lbf (11.2 mv/n), teds 1.0

ICP® Impact Hammer

Model TLD086C02

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
2 Call for Lead Time
  • CE
  • IP

Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 100 lbf, 50 mV/lbf (11.2 mV/N), TEDS 1.0

  • Sensitivity: (±15%)50 mV/lbf (11.2 mV/N)
  • Measurement Range: ±100 lbf pk (±444 N pk)
  • Hammer Mass: 0.34 lb (0.16 kg)

Specification Notes

[1] Typical.
[2] See PCB Declaration of Conformance PS068 for details.

English: SI:
Performance
Sensitivity (±15 %) 50 mV/lbf 11.2 mV/N
Measurement Range ±100 lbf pk ±444 N pk
Resonant Frequency ≥22 kHz ≥22 kHz
Non-Linearity ≤1 % ≤1 %
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance <100 Ohm <100 Ohm [1]
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant ≥500 sec ≥500 sec [1]
Physical
Sensing Element Quartz Quartz
Sealing Epoxy Epoxy
Hammer Mass 0.34 lb 0.16 kg
Head Diameter 0.62 in 1.57 cm
Tip Diameter 0.25 in 0.63 cm
Hammer Length 8.5 in 21.6 cm
Electrical Connection Position Bottom of Handle Bottom of Handle
Extender Mass Weight 2.6 oz 75 gm
Electrical Connector BNC Jack BNC Jack

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
084A08 Extender mass, stainless steel, 0.615" dia. x 2.00", 2.6 oz (75 gm), for Models 086C02, 086C03, 086C04 1
084B03 Hard, stainless steel, 10-32 thread tip, 3.0 gm (for Models 086C01, 086C02, 086C03, 086C04, 086D05) 1
084B04 Medium, white, 10-32 thread tip, 2.5 gm (for Models 086C01, 086C02, 086C03, 086C04, 086D05) 1
HCS-2 Calibration of Series 086B to 086D instrumented hammers only 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 2
084C05 Soft, black, 10-32 thread tip, 2.3 gm (for Models 086C01, 086C02, 086C03, 086C04, 086D05) 2
084C11 Super soft, red, 10-32 thread tip, 2.3 gm (for Models 086C01, 086C02, 086C03, 086C04) 2
085A10 Protective cap (for medium hammer tip) 2

Optional Versions

Build Out Your Measurement Chain