Platinum Swiveler® Industrial ICP® Accelerometer

Model M607A11/030BZ

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-10 is 3 Wks. Lead Time for 11-20 is 4 Wks.

Platinum Stock Products; Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 30-ft integral cable & swiveler base, M6 mounting stud, single point ISO 17025 accredited calibration

US patent number 6.435.902.

Sensitivity: (±15%)100 mV/g (10.2 mV/(m/s²))
Frequency Range: (±3dB)30 to 600000 cpm (0.5 to 10000 Hz)
Sensing Element: Ceramic
Measurement Range: ±50 g (±490 m/s²)
Weight: 1.1 oz (31 gm)

Additional configurations:

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] Twisted shielded pair.
[5] Stud torque must exceed sensor hex nut torque to ensure proper dismantling.
[6] 1/8" hex Allen key required for English version, 4 mm hex Allen key required for Metric version.
[7] Measured with mounting stud.
[8] See PCB Declaration of Conformance PS023 or PS060 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	100 mV/g	10.2 mV/(m/s²)	[1]
Measurement Range	±50 g	±490 m/s²
Frequency Range (±3 dB)	30 to 600000 cpm	0.5 to 10000 Hz
Resonant Frequency	1500 kcpm	25 kHz	[3]
Broadband Resolution (1)	350 µg	3434 µm/sec²	[3]
Non-Linearity	±1 %	±1 %	[2]
Transverse Sensitivity	≤7 %	≤7 %
Environmental
Overload Limit (Shock)	5000 g pk	49050 m/s² pk
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[3]
Enclosure Rating	IP68	IP68
Electrical
Settling Time (within 1% of bias)	≤2 sec	≤2 sec
Discharge Time Constant	≥0.3 sec	≥0.3 sec
Excitation Voltage	18 to 28 VDC	18 to 28 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	<150 Ohm	<150 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Spectral Noise (10 Hz)	8 µg/√Hz	78.5 (µm/sec²)/√Hz	[3]
Spectral Noise (100 Hz)	5 µg/√Hz	49.1 (µm/sec²)/√Hz	[3]
Spectral Noise (1 kHz)	4 µg/√Hz	39.2 (µm/sec²)/√Hz	[3]
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Size - Hex	9/16 in	14 mm
Size - Height	0.97 in	24.6 mm
Weight (without cable)	1.1 oz	31 gm	[7]
Mounting	Stud	Stud
Mounting Torque (Stud)	7 to 8 ft-lb	9.5 to 10.8 Nm	[5] [6]
Mounting Torque (hex nut)	2 to 5 ft-lb	2.7 to 6.8 Nm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	Molded Integral Cable	Molded Integral Cable
Electrical Connection Position	Side	Side
Cable Length	30 ft	9.14 m
Cable Type	Polyurethane	Polyurethane	[4]

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A156	Swivel mounting stud, 1/2-20 to 1/4-28 stud with 1/8" hex socket for installation (for models 607A11 & 607A61)	1
ICS-2	Calibration of industrial accel., single-point, 100 Hz reference sensitivity	1

Optional Versions

(EX) Hazardous Area Approval- contact factory for specific approvals

	English	SI
Hazardous Area Approval	EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval	EEx nL IIC 1T4, -40 = Ta = 121°C, II 3 G

(M) Metric Mount

Accessories:
Supplied	M080A159	Swivel Mounting Stud	1

(TO) Temperature Output

	English	SI
Temperature Output Range	+36 to +250 °F	+2 to +121 °C
Temperature Scale Factor	5.56 mV/°F + 32	+10 mV/°C
Electrical Connections	Temperature Output
Electrical Connections	Acceleration Output
Electrical Connections	Ground
Electrical Connector	Molded Integral Cable