high temp., miniature (2 gm), ceramic shear, charge output accel., 3 pc/g, 12k hz, 5-44 side conn.(-95f to +500f), m3 x 0.50 integral stud

CHARGE OUTPUT ACCELEROMETER

Model M357B11

  • CE
  • IP

High temp., miniature (2 gm), ceramic shear, charge output accel., 3 pC/g, 12k Hz, 5-44 side conn.(-95F to +500F), M3 x 0.50 integral stud

  • Sensitivity: (±10%)3.0 pC/g (0.31 pC/(m/s²))
  • Measurement Range: ±2300 g pk (±22600 m/s² pk)
  • Frequency Range: (+5%)12000 Hz
  • Weight: 0.071 oz (2.0 gm)

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Low frequency response is determined by external signal conditioning electronics.
[3] Typical.
[4] Capacitance will vary based on cable length. Typical cable capacitance is 29 pF/ft (95 pF/m).
[5] See PCB Declaration of Conformance PS081 for details.

English: SI:
Performance
Sensitivity (±10 %) 3.0 pC/g 0.31 pC/(m/s²)
Measurement Range ±2300 g pk ±22600 m/s² pk
Frequency Range (+5 %) 12000 Hz 12000 Hz [2]
Frequency Range (+10 %) 16000 Hz 16000 Hz [2]
Frequency Range (+3 dB) 26000 Hz 26000 Hz [2]
Resonant Frequency ≥50 kHz ≥50 kHz
Non-Linearity (1700 g, 16700 m/s²) ≤1 % ≤1 % [1]
Non-Linearity ≤2 % ≤2 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±10000 g pk ±98000 m/s² pk
Temperature Range -95 to +500 °F -71 to +260 °C
Temperature Response See Graph %/°F See Graph %/°F [3]
Base Strain Sensitivity 0.002 g/µε 0.02 (m/s²)/µε [3]
Electrical
Capacitance 485 pF 485 pF [3]
Insulation Resistance (at 500°F) >100000000 Ohm >100000000 Ohm [3]
Insulation Resistance (at 70° F [21°C]) >1000000000000 Ohm >1000000000000 Ohm
Output Polarity Negative Negative
Physical
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Welded Hermetic Welded Hermetic
Size - Hex .312 in 7.92 mm
Size - Height 0.43 in 10.9 mm
Weight 0.071 oz 2.0 gm [3]
Electrical Connector 5-44 Coaxial 5-44 Coaxial
Electrical Connection Position Side Side
Mounting Thread 5-40 Male 5-40 Male
Mounting Torque 4 to 5 in-lb 45 to 57 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1

Optional Versions


(A) Adhesive Mount
Accessories:
Supplied 080A90 Quick Bonding Gel 1

(J) Ground Isolated

English SI
Frequency Range 10 kHz
Frequency Range 13.5 kHz
Resonant Frequency ≥49 kHz
Electrical Isolation 100000000 Ohm
Size - Height 0.39 in 9.91 mm
Size - Hex 0.375 in 9.5 mm
Weight 0.11 oz 3.2 gm

(M) Metric Mount

English SI
Mounting Thread M3 x 0.50 Male

(W) Water Resistant Cable

English SI
Electrical Connector Sealed Integral Cable
Electrical Connection Position Side
Cable Type 003 Low-noise, blue, coaxial, PTFE cable