force ring, 100k lb comp., 17 pc/lb, charge output, metric mounting

Force Sensor, Charge Output

Model M217B

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • IP

Force ring, 100k lb comp., 17 pC/lb, charge output, metric mounting

  • Sensitivity: (±15%)17 pC/lb (3822 pC/kN)
  • Upper Frequency Limit: 35000 Hz
  • Temperature Range: -100 to +400 °F (-73 to +204 °C)
  • Weight: 12.5 oz (354 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Estimated using rigid body dynamics calculations.
[3] Low frequency response and system noise dependent on choice of external signal conditioning electronics.
[4] Typical.

English: SI:
Performance
Sensitivity (±15 %) 17 pC/lb 3822 pC/kN
Measurement Range (Compression) ≤100000 lb ≤444.8 kN
Maximum Static Force (Compression) 110000 lb 489.3 kN
Upper Frequency Limit 35000 Hz 35000 Hz [2] [3]
Non-Linearity ≤1 % FS ≤1 % FS [1]
Environmental
Temperature Range -100 to +400 °F -73 to +204 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Electrical
Capacitance 130 pF 130 pF [4]
Insulation Resistance ≥1E12 ≥1E12
Output Polarity (Compression) Negative Negative
Physical
Preload 33750 lb 150.13 kN
Stiffness 131 lb/µin 23 kN/µm [4]
Size - Diameter 2.950 in 74.93 mm
Size - Height 0.670 in 17.02 mm
Size - Bolt Diameter 1.5 in 40 mm
Size - ID (Hole Diameter) 1.610 in 40.89 mm
Size - OD (Sensor) 2.950 in 74.93 mm
Size - Sensing Surface 2.660 in 67.56 mm
Weight 12.5 oz 354 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
080A82 Assembly lubricant (for Series 201-207 force rings) 1
081A17 Mounting stud, 1 1/8-12 x 2.280", BeCu for Models 207C & 217B 1
082B07 Anti-friction washer for Models (M)207C & (M)217B 1
083B07 Pilot bushing for Models 207C & 217B 1

Optional Versions

(M) Metric Mount
Accessories:
Supplied 080A82 Accessory for Force - Torque Division Product 1
Supplied 082B07 Anti-friction washer (for Models 207C and 217B) 1
Supplied M081A17 Mounting Stud, M30 x 2.00 x 2.280, BeCu 1
Supplied M083B07 Pilot Bushing 1

(P) Positive Output Polarity

English SI
Output Polarity Positive

(W) Water Resistant Cable

English SI
Electrical Connector Molded Integral Cable Molded Integral Cable
Electrical Connection Position Side

Build Out Your Measurement Chain

217B
Model: 217B

Force ring, 100k lb comp., 17 pC/lb, cha...

$3,200.00 USD

(Pricing valid only in the U.S.)

Add to Cart
082B07
Model: 082B07

Anti-friction washer for Models (M)207C ...

$295.00 USD

(Pricing valid only in the U.S.)

Add to Cart
M081A17
Model: M081A17

Mounting stud, M30x2.00 x 2.280", BeCu f...

$235.00 USD

(Pricing valid only in the U.S.)

Add to Cart
M083B07
Model: M083B07

Pilot bushing for Models M207C & M217B

$195.00 USD

(Pricing valid only in the U.S.)

Add to Cart