8-channel, line-powered, icp® sensor signal cond., unity gain, bnc input/output conn., rack mount

Eight-Channel, ICP® Sensor Signal Conditioner

Model 483C05

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-2 is 15 Dys.
Lead Time for 3-6 is 20 Dys.
Lead Time for 7-10 is 4 Wks.
Lead Time for 7-10 is 4 Wks.
  • CE
  • IP

8-channel, line-powered, ICP® sensor signal cond., unity gain, BNC input/output conn., rack mount

  • Sensor Input Type(s): ICP®
  • Channels: 8
  • Power Required: AC Power

Specification Notes

[1] With >= 1M ohm input impedance of readout device.
[2] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[3] Typical.
[1] With >= 1M ohm input impedance of readout device.
[4] User adjustable, factory set at 4 mA (± 0.5 mA). Each control adjusts 4 channels.
[2] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[5] See PCB Declaration of Conformance PS024 for details.

English: SI:
Performance
Channels 8 8
Sensor Input Type(s) ICP® ICP®
Output Range (Maximum) ±10 V ±10 V
Low Frequency Response (-5 %) <0.1 Hz <0.1 Hz [1] [2]
High Frequency Response (-5 %) >1000 kHz >1000 kHz
Phase Response (at 1 kHz) ±1 ° ±1 °
Cross Talk (maximum) -72 dB -72 dB
Fault/Bias Monitor/Meter (LED) Open/Short/Overload Open/Short/Overload
Environmental
Temperature Range (Operating) +32 to +122 °F 0 to +50 °C
Electrical
Power Required AC Power AC Power
AC Power (47 to 63 Hz) 100 to 240 VAC 100 to 240 VAC
AC Power ≤0.7 Amps ≤0.7 Amps
Excitation Voltage (±1 VDC) (To Sensor) +26 VDC +26 VDC
DC Offset <20 mV <20 mV
Constant Current Excitation (To Sensor) 0 to 20 mA 0 to 20 mA [4]
Discharge Time Constant (0 to 50 %) >5 sec >5 sec [1] [2]
Broadband Electrical Noise (1 to 10000 Hz) 3.5 µV rms 3.5 µV rms [3]
Spectral Noise (1 Hz) 1.30 µV/√Hz 1.30 µV/√Hz [3]
Spectral Noise (10 Hz) 0.10 µV/√Hz 0.10 µV/√Hz [3]
Spectral Noise (100 Hz) 0.08 µV/√Hz 0.08 µV/√Hz [3]
Spectral Noise (1 kHz) 0.07 µV/√Hz 0.07 µV/√Hz [3]
Spectral Noise (10 kHz) 0.07 µV/√Hz 0.07 µV/√Hz [3]
Overload Threshold (±1.0 Vpk) ±10 Vpk ±10 Vpk
Physical
Electrical Connector (ICP® Sensor Input) BNC Jack BNC Jack
Electrical Connector (Output) BNC Jack BNC Jack
Electrical Connector (AC Power Input) IEC 320 IEC 320
Size - Height (nominal ) 1.75 in 44.5. mm
Size - Width (nominal ) 19 in 482.6 mm
Size - Depth (nominal ) 13.7 in 348 mm
Weight 6.25 lb 2.83 kg

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
017AXX 1