shock, quartz-shear, icp® accel., 0.5 mv/g, 10k g range, lp filter, 10-32 top conn.

ICP® SHOCK ACCELEROMETER

Model 350A13

Add to Quote
  • CE
  • IP

Shock, quartz-shear, ICP® accel., 0.5 mV/g, 10k g range, LP filter, 10-32 top conn.

  • Sensitivity: (±15%)0.5 mV/g (0.051 mV/(m/s²))
  • Measurement Range: ±10000 g pk (±98000 m/s² pk)
  • Frequency Range: (±10%)0.4 to 7500 Hz
  • Weight: 0.63 oz (17.9 gm)

Specification Notes

[1] Typical.
[2] Electrical filter is a first order low pass filter
[1] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±15 %) 0.5 mV/g 0.051 mV/(m/s²)
Measurement Range ±10000 g pk ±98000 m/s² pk
Frequency Range (±10 %) 0.4 to 7500 Hz 0.4 to 7500 Hz
Electrical Filter Cutoff Frequency (-10 %) ≥75 kHz ≥75 kHz [2]
Resonant Frequency ≥50 kHz ≥50 kHz
Broadband Resolution (1) 0.06 g rms 0.59 m/s² rms [1]
Non-Linearity (per 1000 g (9810 m/s2)) ≤1 % ≤1 %
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±30000 g pk ±294000 m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Range (Storage) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph %/°F See Graph %/°F [1]
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 12 VDC 8 to 12 VDC
Discharge Time Constant 0.4 to 1.4 sec 0.4 to 1.4 sec
Settling Time (within 10% of bias) ≤5 sec ≤5 sec
Physical
Sensing Element Quartz Quartz
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Size - Hex 0.5 in 12.7 mm
Size - Height 1.45 in 36.8 mm
Weight 0.63 oz 17.9 gm [1]
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Top Top
Mounting Thread 1/4-28 Male 1/4-28 Male
Mounting Torque 25 to 40 in-lb 280 to 450 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
ACS-14 High G accel. verification using Hopkinson bar to max g range, (NIST traceable). 1
ACS-22 **OBSOLETE see ACS-22/ACS-14** Amplitude response cal for shock accel, 100 Hz to upper 1 dB freq (max 15 kHz) 1

Optional Versions

(M) Metric Mount

English SI
Mounting Thread M6 x 0.75 Male