penetration icp® force sensor, 5k lb comp., 500 lb tension, 1 mv/lb, 1 dia. removable hemispherical cap

Force Sensor, ICP®

Model 208A45

  • CE
  • IP

Penetration ICP® force sensor, 5k lb comp., 500 lb tension, 1 mV/lb, 1" dia. removable hemispherical cap

    Specification Notes


    [1] Zero-based, least-squares, straight line method.
    [2] Calculated from discharge time constant.
    [3] See PCB Declaration of Conformance PS023 for details.

    English: SI:
    Performance
    Sensitivity (±15 %) 1.0 mV/lb 224.8 mV/kN
    Measurement Range (Compression) 5000 lb 22.24 kN
    Measurement Range (Tension) 500 lb 2.224 kN
    Maximum Static Force (Compression) 10000 lb 44.48 kN
    Maximum Static Force (Tension) 750 lb 3.336 kN
    Broadband Resolution (1) 0.10 lb-rms 0.0004448 N-rms
    Low Frequency Response (-5 %) 0.0003 Hz 0.0003 Hz [2]
    Upper Frequency Limit 25000 Hz 25000 Hz
    Non-Linearity ≤1 % FS ≤1 % FS [1]
    Environmental
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
    Electrical
    Discharge Time Constant (at room temp) ≥2000 sec ≥2000 sec
    Excitation Voltage +20 to 30 VDC +20 to 30 VDC
    Full Scale Output +5 V +5 V
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance ≤100 Ohm ≤100 Ohm
    Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
    Output Polarity (Compression) Positive Positive
    Physical
    Stiffness 10 lb/µin 1.75 kN/µm
    Size - Diameter 1.00 in 25.4 mm
    Size - Height 1.86 in 47.24 mm
    Weight 1.80 oz 51 gm
    Housing Material Stainless Steel Stainless Steel
    Impact Tip Material 17-4 SS 17-4 SS
    Sealing Epoxy Epoxy
    Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
    Electrical Connection Position Top Top
    Mounting Thread No English Equivalent M7 x 0.75 Male

    * All specifications are at room temperature unless otherwise specified.

    Accessories


    Supplied
    084A45 Impact cap, hemispherical (for Model 208A45) 1