dual bridge load cell, fatigue rated low profile, 50k lb fs, 1.75-12 (f) thd, pt conn.

FATIGUE RATED LOW PROFILE LOAD CELL, DUAL BRIDGE

Model 1408-02ADB

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • IP

Dual bridge load cell, fatigue rated low profile, 50k lb FS, 1.75-12 (F) thd, PT conn.

  • Measurement Range: 50 klb (222 kN)
  • Size - Diameter: 8.00 in (203.20 mm)
  • Size - Height: 4.50 in (114.30 mm)
  • Electrical Connector: PT02E-10-6P (2)

Specification Notes

[1] Nominal.
[2] FS - Full Scale.
[3] RO - Rated Output.
[4] Calibrated in tension and compression.
[5] Singularly applied, i.e. no other extraneous loads.
[6] Over compensated operating temperature range.
[1] Nominal.
[7] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[8] See Outline Drawing 49042 for Complete Dimensions

English: SI:
Performance
Measurement Range (100 x 10^6 cycles) 50 klb 222 kN [2] [4]
Sensitivity (±10 %) 2.0 mV/V 2.0 mV/V [1] [3]
Non-Linearity ≤0.05 % FS ≤0.05 % FS
Hysteresis ≤0.05 % FS ≤0.05 % FS
Non-Repeatability ≤0.02 %RO ≤0.02 %RO
Creep (in 20 minutes) 0.025 % 0.025 %
Static Error Band ≤0.05 % FS ≤0.05 % FS [2]
Eccentric Load Sensitivity 0.1 %/in 0.1 %/25.4mm
Resonant Frequency 18 kHz 18 kHz
Side Load Sensitivity 0.1 %/in 0.1 %/25.4mm
Environmental
Overload Limit 150 klb 667 kN
Load Limit (Side Force, FX or FY) 50 klb 222 kN [5]
Load Limit (Bending Moment, MX or MY) 50k in-lb 5649 Nm [5]
Load Limit (Axial Torque, MZ) 50k in-lb 5649 Nm [5]
Temperature Range (Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +15 to +115 °F -9 to +46 °C
Temperature Effect on Output (Maximum) ±0.0008 %Reading/°F ±0.0018 %Reading/°C [6]
Temperature Effect on Zero Balance (Maximum) ±0.0008 %FS/°F ±0.0018 %FS/°C [6]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [1]
Excitation Voltage (Recommended) 10 VDC 10 VDC [7]
Insulation Resistance >5k GOhm >5k GOhm
Zero Balance ≤1 %RO ≤1 %RO
Output Polarity +Tension +Tension
Physical
Size - Height 4.50 in 114.30 mm [8]
Size - Diameter 8.00 in 203.20 mm [8]
Weight 54 lb 25.5 kg
Mounting Thread 1 3/4 - 12 UNF-3B No Metric Equivalent
Sensing Element Strain Gage Strain Gage
Mounting Torque 2600 in-lb 294 Nm
Deflection at Full Scale Capacity 0.001 in 0.025 mm
Electrical Connector PT02E-10-6P (2) PT02E-10-6P (2)

* All specifications are at room temperature unless otherwise specified.

Accessories
Optional
084A87 1
181-012A PT06A-10-6S (SR) 1
8311-01-10A 4-conductor, PT06A-10-6S to pigtails cable, 10-ft, for Reaction Torque and Load Cells with PT connector (& 8162 Series), <20 ft 1