pcb l&t rod end load cell, 500 lbf (2.2 kn) rated capacity, 50% static overload protection, 3/4-16 male & female thread, aluminum construction

Rod end load cell

Model 1380-01A

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-1 is 3 Wks.
  • IP

PCB L&T Rod End Load Cell, 500 lbf (2.2 kN) rated capacity, 50% static overload protection, 3/4-16 male & female thread, aluminum construction

Cable <20ft: 8311-04-xxA, 8311-17-xxA and 8311-01-xxA

Cable >=20ft: 8311-05-xxA, 8311-18-xxA and 8311-02-xxA

  • Measurement Range: 500 lbf (2224 N)
  • Size - Diameter: 1.50 in (38.1 mm)
  • Size - Height: 4.25 in (107.9 mm)
  • Electrical Connector: PT02E-10-6P

Specification Notes

[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Singularly applied, i.e. no other extraneous loads.
[4] Over compensated operating temperature range.
[5] Nominal.
[6] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[7] See Outline Drawing 45488 for complete dimensions.

English: SI:
Performance
Measurement Range 500 lbf 2224 N [1]
Sensitivity (±10 %) 2 mV/V 2 mV/V [2]
Non-Linearity ≤0.25 % FS ≤0.25 % FS
Hysteresis ≤0.15 % FS ≤0.15 % FS
Non-Repeatability ≤0.05 %RO ≤0.05 %RO
Resonant Frequency 9 kHz 9 kHz
Environmental
Overload Limit 750 lbf 3336 N
Load Limit (Side Force, FX or FY) 250 lbf 1112 N [3]
Load Limit (Bending Moment, MX or MY) 750 inf-lb 85 Nm [3]
Load Limit (Axial Torque, MZ) 500 inf-lb 56 Nm [3]
Temperature Range (Operating) -20 to +200 °F -28 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.01 %Reading/°F ±0.018 %Reading/°C [4]
Temperature Effect on Zero Balance (Maximum) ±0.005 %FS/°F ±0.009 %FS/°C [4]
Electrical
Bridge Resistance 350 Ohm 350 Ohm [5]
Excitation Voltage (Recommended) 10 VDC 10 VDC [6]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity Positive Positive
Output Polarity +Tension +Tension
Physical
Size - Height 4.25 in 107.9 mm [7]
Size - Diameter 1.50 in 38.1 mm [7]
Weight 0.5 lb 227 g
Mounting Thread 3/4 - 16 Male No Metric Equivalent
Mounting Thread 3/4 - 16 Female No Metric Equivalent
Cover Material Anodized Aluminum Anodized Aluminum
Sensor Material Anodized Aluminum Anodized Aluminum
Sensing Element Strain Gage Strain Gage
Deflection at Full Scale Capacity 0.0004 in 0.010 mm
Electrical Connector PT02E-10-6P PT02E-10-6P

* All specifications are at room temperature unless otherwise specified.

Accessories
Optional
181-012A Mating conn., 6-socket (F) w/strain relief for sensors with PT conn. PT06A-10-6S (SR) 1
8311-01-10A 4-conductor, PT06A-10-6S to pigtails cable, 10-ft, for Reaction Torque and Load Cells with PT connector (& 8162 Series), <20 ft 1