high frequency pressure sensor, 15k psi, 0.39 pc/psi, 0.218 dia. diaphragm, accel. comp., 5-point cal ranges at 15kpsi, 5kpsi and 100 psi

Charge Output Pressure Sensor

Model 113B03

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Lead Time for 1-5 is 5 Wks.
Lead Time for 6-10 is 6 Wks.
  • CE
  • IP

High frequency pressure sensor, 15k psi, 0.39 pC/psi, 0.218" dia. diaphragm, accel. comp., 5-point cal ranges at 15kpsi, 5kpsi and 100 psi

  • Measurement Range: 15 kpsi (103420 kPa)
  • Sensing Element: Quartz
  • Temperature Range: -100 to +400 °F (-73 to +204 °C)
  • Electrical Connector: 10-32 Coaxial Jack
  • Weight: 0.212 oz (6.0 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] For sensor mounted in thread adaptor, see adaptor installation drawing for supplied accessories and pressure limitations.
[3] Typical.
[4] See PCB Declaration of Conformance PS158 for details.

English: SI:
Performance
Sensitivity (±15 %) 0.39 pC/psi 0.056 pC/kPa
Sensitivity (±15 %) 0.39 pC/psi 0.056 pC/kPa
Measurement Range 15 kpsi 103420 kPa [2]
Maximum Pressure (Total) 15 kpsi 103420 kPa [2]
Resonant Frequency ≥500 kHz ≥500 kHz
Rise Time (Reflected) ≤1.0 µ sec ≤1.0 µ sec
Non-Linearity ≤1.0 % FS ≤1.0 % FS [1]
Environmental
Acceleration Sensitivity 0.002 psi/g 0.0014 kPa/(m/s²) [3]
Temperature Range (Operating) -100 to +400 °F -73 to +204 °C
Temperature Coefficient of Sensitivity ≤0.03 %/°F ≤0.054 %/°C
Maximum Vibration 2000 g pk 19600 m/s² pk
Maximum Shock 20000 g pk 196000 m/s² pk
Electrical
Output Polarity (Positive Pressure) Negative Negative
Capacitance 12 pF 12 pF [3]
Insulation Resistance (at room temp) ≥1000000000000 Ohm ≥1000000000000 Ohm
Insulation Resistance (400) ≥1000000000 Ohm ≥1000000000 Ohm
Insulation Resistance (at room temp) ±1000000000000 Ohm ±1000000000000 Ohm
Physical
Sensing Element Quartz Quartz
Sensing Geometry Compression Compression
Housing Material 17-4 Stainless Steel 17-4 Stainless Steel
Diaphragm Invar Invar
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Weight 0.212 oz 6.0 gm

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
PCS-1BC 0
060A03 Clamp nut, 5/16-24-2A thd, 1/4" hex, SS (for Series 111, 112 & 113) 1
060A05 Clamp nut, M7 x 0.75-6G thd (for Series M111, M112 & M113) 1
065A05 Seal sleeve, sensor recess mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4 SS (for Series 111A, 112A & 113A) 1
065A02 Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (for Series 111A, 112A & 113A) 3

Optional Versions

(E) Emralon coating
Accessories:
Supplied 065A08 Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized aluminum 3
Supplied 065A22 Isolation Seal, .250" OD x .218" ID x .015", Torlon or Vespel 3
Supplied 065A08 Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized aluminum 3
Supplied 065A22 Isolation Seal, .250" OD x .218" ID x .015", Torlon or Vespel 3

(S) Stainless Steel Diaphragm

English SI
Diaphragm 316L Stainless Steel