Productos

low cost embeddable accelerometer, 3-wire, micropower, 100 mv/g, to5 housing, positive output, header pins

3 WIRE LOW POWER EMBEDDABLE INDUSTRIAL ACCELEROMETER

Model 66213RPZ1

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Low cost embeddable accelerometer, 3-wire, MicroPower, 100 mV/g, TO5 housing, positive output, header pins

  • Sensitivity: (±20%)100 mV/g (10.2 mV/(m/s²))
  • Frequency Range: (±3dB)2 to 12.5k Hz (2 to 12.5k Hz)
  • Sensing Element: Ceramic
  • Measurement Range: 12.5 g (123 m/s²)
  • Weight: 0.1 oz (3 gm)

Specification Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] Positive output along Z-axis (in upward direction when pin mounted).
[6] Performance depends on mounting
[4] Typical.
[7] See PCB Declaration of Conformance PS274 for details

English: SI:
Performance
Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1] [5]
Measurement Range 12.5 g 123 m/s²
Frequency Range (±3 dB) 2 to 12.5k Hz 2 to 12.5k Hz [3] [6]
Resonant Frequency >25 kHz >25 kHz [6]
Broadband Resolution 400 3.9 mm/s² [4]
Non-Linearity ≤1 % ≤1 % [2]
Transverse Sensitivity ≤7 % ≤7 %
Environmental
Overload Limit (Shock) 5000 g pk 49k m/s² pk
Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
Temperature Response See Graph See Graph [4]
Electrical
Settling Time (Within 10% of the output bias) 350 µs 350 µs [4]
Discharge Time Constant ≥0.08 sec ≥0.08 sec
Excitation Voltage 3 to 5.5 VDC 3 to 5.5 VDC
Output Impedance <1000 Ohm <1000 Ohm
Current Draw 60 µA 60 µA [4]
Output Bias Voltage (±5 %) 1.5 VDC 1.5 VDC
Spectral Noise (10 Hz) 24 235 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 8 78 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 4 39 (µm/sec2)/√Hz [4]
Physical
Size - Lip Diameter 0.36 9.1 mm
Size - Height 0.38 in 9.7 mm
Weight 0.1 oz 3 gm
Mounting Adhesive/Solder Adhesive/Solder
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector Header Pins Header Pins
Electrical Connection Position Bottom Bottom
Electrical Connections (Pin 1) Acceleration Output Acceleration Output
Electrical Connections (Pin 2) Case Case
Electrical Connections (Pin 3) Neg (-) Ground Neg (-) Ground
Electrical Connections (Pin 4) Pos (+) Power Pos (+) Power

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1